Advertisement
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Torx Driver
Flat Head Screw Driver
Philips Driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
System Board Battery – Remove the top cover and locate the battery on the system board. With a medium flat head
screw driver remove the battery and dispose of properly.
2.
BBWC Battery – Locate the BBWC battery inside the server then with a medium flat head screw driver remove the
battery and dispose of properly.
3.
Capacitors => 2.5CM – Remove the power supply from the system. With #2 Philips screw driver remove the screws
securing the top cover then locate the capacitors and pry from the PCB with a medium flat head screw driver and
dispose of properly.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Attachment 1 – Disassembly Diagram
Attachment 1, 2 & 3 – System Battery Location
Attachment 1 – Battery Backed Module Location
Attachment 1, 4 & 5 – Power Supply Capacitor Locations
EL-MF877-00
Template Revision A
Tool Size (if
applicable)
T-15
Medium
# 2
Page 2
Advertisement
