homelabs HME030438N User Manual page 2

To prevent any internal damage, it is very important to
keep the unit upright throughout its journey. Please leave it standing
upright and outside the box for 24 HOURS before plugging it in.
In the event this product malfunctions, or you believe it is
defective, please contact Customer Service at homelabs.com/help,
1-(800)-898-3002
product (pending further instruction). A defective product should
be clearly marked or stored where it cannot be used by mistake.
Failure to keep the product in its original quality from the time of
receipt may impede hOmeLabs's ability to correct any legitimate
problem and may limit the extent to which hOmeLabs™
1. Remove all packaging materials inside the fridge, including bottom
cushions, foam pads, and tape. Tear off the protective film on the
fridge door and the fridge body.
2. Allow the fridge to run for 2 to 3 hours before adding any fresh or
frozen foods.
3. In the summer or during hot weather, allow the fridge to run for at
least 4 hours in advance before adding any food.
Before First Use
or help@homelabs.com
may provide recourse.
Before First Use
and hold onto the defective