homelabs HME030438N User Manual page 12

Installation
REVERSE THE DOOR SWING (CONT.)
5
Slide the appliance door down about 5.9"
and off the top hinge pin and lift it away from
the appliance and off the top hinge pin. Set
the door aside.
7
Remove the two screws from top the bracket
and replace them on the new/other side,
using the items you set aside in Step 4. You
will need to first remove the plastic caps
from the other side.
9
Replace the other foot on the other side.
Replace the plastic caps. Caps click into
position on the door hinge brackets.
6
Remove the plastic caps from the remaining
brackets on the opposite side.
8
8
Slide the appliance door onto the top hinge.
Ensure the door is right side up (finger
groove at top). Secure the door by screwing
in the bottom bracket on the new side.
10
Confirm the door is aligned horizontally and
vertically and that the seals are closed on all
sides. Then tighten the bottom hinge. Adjust
the leveling feet.
12