Samsung HW-Q700B User Manual page 4

03 CONNECTING THE
SOUNDBAR
Connecting the power and units
Rear of
Subwoofer
Blue Blinks
POWER
Bottom of the
Soundbar Main Unit
• The LINK LED indicator stops blinking and glows a
solid blue when a connection is established between
the Soundbar and the Wireless Subwoofer.
04 USING A WIRED
CONNECTION
1
2
HDMI OUT
HDMI IN
(ARC)
Connecting using an HDMI Cable
(External Device (HDMI) / TV ARC/eARC)
OPTICAL OUT
Connecting using an Optical Cable (D.IN)
SERVICE
DIGITAL AUDIO IN DIGITAL AUDIO IN
(OPTICAL) (OPTICAL)
SERVICE
ID SET HDMI IN 1 HDMI IN 1 HDMI 1
ID SET (WOOFER, REAR)
HDMI 1
NETWORK
HDMI IN 2 HDMI IN 2 HDMI 2
HDMI TO TV
(eARC/ARC)
HDMI TO TV
(eARC/ARC)
HDMI Cable
Optical Cable
(not supplied)
DIGITAL AUDIO IN
(OPTICAL)
HDMI
1
1
HDMI TO TV
(eARC/ARC)
DIGITAL AUDIO IN
2
(OPTICAL)
HDMI 1
HDMI 2
ENG - 4
NOTE
• When the TV sound is not output, press the
(Source) button at the top of the Soundbar or the
(Source) button on the remote control to select
the "D.IN" mode. The screen displays "D.IN" and "TV
ARC/eARC" in sequence, and TV sound is played.
• The recommended cable is High Speed HDMI Cable
with Ethernet.
• When you use an optical cable and the terminals
have covers, be sure to remove the covers.
POWER
Using the Q-Symphony Function
For Q-Symphony, the Soundbar syncs with a Samsung
TV to output sound through two devices for optimum
surround effect. When the Soundbar is connected, the
menu, "TV+Soundbar" appears under the Sound Output
menu of the TV. (The message above differs with the TV
model.)
• TV menu example: TV + [AV] Soundbar series name
(HDMI/Wi-Fi)
NOTE
• It can operate according to the Codec supported by
TV.
• This function is supported only when the HDMI Cable
or Optical Cable (not supplied) or Wi-Fi is connected.
• The message displayed may differ with the TV model.
• Ensure that your TV and Soundbar are connected to
the same wireless router/frequency.
• This function is available in some Samsung TVs and
some Soundbar models.
Using the Spacefit sound
The active sound measured from the TV is synced to the
Soundbar.
NOTE
• Only certain TV models support this function, and the
function is operated from the TV.
SERVICE
DIGITAL AUDIO IN DIGITAL AUDIO IN
(OPTICAL) (OPTICAL)
SERVICE
ID SET HDMI IN 1 HDMI IN 1 HDMI 1
ID SET (WOOFER, REAR)
HDMI 1
NETWORK
HDMI IN 2 HDMI IN 2 HDMI 2
HDMI TO TV
(eARC/ARC)
HDMI TO TV
(eARC/ARC)