Samsung HW-Q930D Simple User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Speaker System
  5. HW-Q930D
  6. Simple user manual

Samsung HW-Q930D Simple User Manual

Hide thumbs Also See for HW-Q930D:
Table of Contents

Advertisement

Quick Links

Simple User Guide
Figures and illustrations in this User Manual are provided for reference only and
may differ from actual product appearance
HW-Q930D / HW-Q800D
You can access the User guide on Samsung's on-line customer support center by scanning the QR code on
the left.
To see the manual on your PC or mobile device, download the manual in document format from Samsung's
website. (http://www.samsung.com/support)
QUESTIONS OR COMMENTS?
Samsung Service Center
1-800-SAMSUNG (726-7864)
© 2024 Samsung Electronics Co., Ltd. All rights reserved.
SAFETY INFORMATION
• The following also applies to the Subwoofer
(PS-WQ930D
HW-Q930D only).
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Refer to the table below for an explanation of symbols
which may be on your Samsung product.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT
OPEN.
This symbol indicates that high voltage is
product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
Class II product : This symbol indicates that a
safety connection to electrical earth (ground)
is not required.
If this symbol is not present on a product
with a power cord, the product MUST have
a reliable connection to protective earth
(ground).
Web Site
www.samsung.com/us/support
PS-RQ930D:
WARNING
•
• To prevent injury, this apparatus must be securely
•
CAUTION
• Do not expose this apparatus to dripping or splashing.
• To turn this apparatus off completely, you must pull the
AH81-17410A-00
NSPBI01554A-00
Address
Samsung Electronics America, Inc.
NJ 07660
symbol is AC voltage.
symbol is DC voltage.
Caution. Consult Instructions for use : This
symbol instructs the user to consult the user
manual for further safety related information.
this appliance to rain or moisture.
installation instructions.
California to cause cancer and birth defects or other
reproductive harm.
the apparatus.
power plug must be easily and readily accessible at all
times.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HW-Q930D and is the answer not in the manual?

Questions and answers

Maria Álvarez
January 18, 2025

How I put the speaker in the wall?

0
1 comments:
Mr. Anderson
May 14, 2025

To mount the Samsung HW-Q930D surround speakers on the wall:

1. Check Wall Strength: Ensure the wall can support more than 17.6 lbs (8.0 kg). Reinforce it if needed.

2. Use Correct Wall Mounts:
- Wall mounts must be purchased separately (not provided by Samsung).
- Use wall mounts that fit a 1/4 - 20 UNC threaded insert.
- Standard screw size: 6.35 mm (0.25 inch) diameter, 1.27 mm (0.05 inch) pitch, 18 mm (0.70 inch) long.
- Use one screw each for the left and right speakers.

3. Mark Mounting Holes: Use a guide to mark screw locations on the wall.

4. Drill Holes: Use a drill bit appropriate for your wall type and drill holes at the marked points.

5. Use Appropriate Screws/Anchors: Select screws and anchors suitable for your wall material (e.g., plasterboard, wood). M5 diameter screws, 35 mm or longer, are recommended.

6. Connect Cables: Connect all necessary cables before mounting.

7. Turn Off Power: Make sure the unit is turned off and unplugged to avoid electric shock.

8. Install Speakers: Mount the surround speakers securely onto the wall using the wall mounts and screws.

Always verify wall strength and use proper mounting hardware.

This answer is automatically generated

0

Related Manuals for Samsung HW-Q930D

Summary of Contents for Samsung HW-Q930D

  • Page 1 HW-Q930D / HW-Q800D You can access the User guide on Samsung’s on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website.
  • Page 2 This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the product Responsible Party - U.S. Contact Information: sold or distributed ONLY in California USA “Perchlorate Samsung Electronics America, Inc. Material - special handling may apply, See www.dtsc. 85 Challenger Road. ca.gov/hazardouswaste/perchlorate.”...
  • Page 3 4. Protect the product from moisture (i.e. vases), and product. (Label: Rear of the Soundbar Main Unit) • To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. Your product is not intended for industrial use. It •...
  • Page 4 Subwoofer covers, be sure to remove the covers. Using the Q-Symphony Function When the Soundbar connects to a Samsung TV that Bottoms of the Left and Blue Blinks supports the Q-Symphony function, you can play the sound Right Surround Speakers simultaneously through the Soundbar and the TV.
  • Page 5 PAIRING? • BT READY : In this mode, you can reconnect any Surround Speaker (HW-Q930D only) Samsung TV or mobile device that was connected before. • BT PAIRING : In this mode, you can connect a new device to the Soundbar.
  • Page 6 • HDMI-CEC may not be activated on the TV. Turn on defect in the product. the CEC on the TV menu. (Samsung TV: Home ( • You will be advised of the amount of the administration • If you have a problem with this product, we strongly...
  • Page 7 AMPLIFIER Rated Output power NOTE 240 W • Samsung Electronics Co., Ltd reserves the right to Supported play formats Dolby 5.1ch / Dolby Digital Plus / Dolby TRUE HD / • Weight and dimensions are approximate. Dolby ATMOS / DTS 5.1ch / DTS HD / •...
  • Page 8 SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
  • Page 9 HW-Q930D / HW-Q800D / HW-Q700D To receive more complete service, please register your product at www.samsung.com/register Figures and illustrations in this User Guide are provided for reference only and may differ from actual product appearance. © 2024 Samsung Electronics Co., Ltd. All rights reserved.

  • Page 10: Table Of Contents

    ‒ Recommended Speaker Layout ......12 ‒ Surround speaker mode (HW-Q930D only) ....12 ‒...

  • Page 11: Checking The Components

    • For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Soundbar Main Unit) • To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. • For more information about the wallmount or rubber-foot, see pages 28~30.

  • Page 12: Product Overview

    02 PRODUCT OVERVIEW Top Panel of the Soundbar HW-Q930D / HW-Q800D HW-Q700D (Multi Function) Button (HW-Q930D / HW-Q800D models) • In standby mode, press the (Multi Function) button to turn on the Soundbar. • Press the (Multi Function) button to change the input source.

  • Page 13: Bottom Panel Of The Soundbar

    SERVICE DIGITAL AUDIO IN (OPTICAL) SERVICE SERVICE HDMI IN 1 HDMI DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL) HDMI IN 2 HDMI IN 1 HDMI IN 1 HDMI HDMI HDMI TO TV (eARC/ARC) HDMI IN 2 HDMI IN 2 HDMI TO TV HDMI TO TV Bottom Panel of the Soundbar...

  • Page 14: Using The Soundbar Remote Control

    03 USING THE SOUNDBAR REMOTE CONTROL Inserting Batteries before using the Remote Control (AAA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. How to Use the Remote Control Turns the Soundbar on and off.

  • Page 15: Setting The

    Press the indicated areas to select Up/Down/Left/Right. Press Up/Down/Left/Right on the button to select or set functions. • Music Skip Up/Down/Left/Right Press the Right button to select the next music file. Press the Left button to select the previous music file. •...

  • Page 16: Using The Hidden Buttons

    0~300 milliseconds by using the Up/Down buttons. • Sync is only supported for some functions. • Available Surround speaker mode settings are supported only by HW-Q930D model. • The Virtual Speaker function can be turned ON/OFF by using the Up/Down buttons.
  • Page 17 <HW-Q800D> Output Effect Input With Subwoofer & Surround With Subwoofer Only Speaker 2.0 ch 2.1 ch 2.1 ch 5.1 ch 5.1 ch 5.1 ch / 7.1 ch (DTS) Standard 7.1 ch 5.1 ch 7.1 ch Dolby Atmos®, DTS:X 5.1.2 ch 7.1.4 ch 2.0 ch 5.1.2 ch...

  • Page 18: Adjusting The Soundbar Volume With A Tv Remote Control

    • Set the TV speaker to External Speaker to use this function. • Manufacturers supporting this function: Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.

  • Page 19: Connecting The Soundbar

    04 CONNECTING THE SOUNDBAR Connecting the power and units Use the Power cord to connect the Subwoofer, Surround Speakers, and Soundbar to an electrical outlet in the following order: • For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Soundbar Main Unit) 1.

  • Page 20: Recommended Speaker Layout

    150° Surround Speaker L Surround Speaker R Surround speaker mode (HW-Q930D only) An optimal surround sound may be delivered depending on the position of the surround speaker. See the illustration below for speaker positioning. To activate this mode, select the Surround Speaker mode using the remote control of the Soundbar.

  • Page 21: Manually Connecting The Subwoofer Or Surround Speakers

    Manually connecting the Subwoofer or Surround Speakers Before performing the manual connection procedure below: • Check whether the power cables for the Soundbar and Subwoofer or Surround Speakers are connected properly. • Make sure that the Soundbar is turned off. 1.

  • Page 22: Speakers

    Connect again. See the instructions for manual (applicable models only) Connection failed connection on page 13. Subwoofer Red and blue See the contact information for the Samsung Service Blinking Malfunction Surround Speakers Center in this manual. (applicable models only) Red and blue NOTE •...

  • Page 23: Connecting To A Tv

    • When connecting a TV that supports the eARC function, “TV eARC” appears on the display and the sound is heard. • To connect with eARC, the eARC function in the TV menu should be set to On. Refer to the TV user manual for details on setting. (e.g. Samsung TV : Home ( ) → Menu → Settings ( ) →...

  • Page 24: Connecting Using An Optical Cable

    Optical Cable (not supplied) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Top of the Soundbar <HW-Q930D / HW-Q800D> D.IN Top of the Soundbar <HW-Q700D> D.IN 1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar and the OPTICAL output port on the TV with an optical cable (not supplied), as shown in the figure.

  • Page 25: Connecting Via Bluetooth

    3. Select “Soundbar Q-Series” from the list on TV’s screen. An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the Samsung TV to the Soundbar, select the message, and then establish a connection.
  • Page 26 What is the difference between BT READY and BT PAIRING? • BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before. • BT PAIRING : In this mode, you can connect a new device to the Soundbar.

  • Page 27: Connecting Via Wi-Fi

    ) → Sound → Sound Output → Soundbar Q-Series (Wi-Fi) NOTE • The Wi-Fi Dolby Atmos connection is available in some Samsung TVs and some Soundbar models. • Precaution : The Soundbar will restart automatically if you turn on/turn off Wi-Fi.

  • Page 28: Using The Q-Symphony Function

    Using the Q-Symphony Function • When the Soundbar connects to a Samsung TV that supports the Q-Symphony function you can play the sound simultaneously through the Soundbar and the TV. If you use the Q-Symphony function, the surround sound played on the TV allows you to enjoy a richer, more three- dimensional surround sound effect.

  • Page 29: Using The Spacefit Sound

    “OFF” appears on the display. • This is available in all Sound modes. Method 2. Connecting via TV To enable this function, turn on the Adaptive Sound+ mode on your Samsung TV menu. (Home ( ) → Menu → Settings ( ) →...

  • Page 30: Connecting An External Device

    Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).

  • Page 31: Method 2. Connecting Using An Optical Cable

    Method 2. Connecting using an Optical Cable Top of the Soundbar <HW-Q700D> D.IN Top of the Soundbar <HW-Q930D / HW-Q800D> BD / DVD player / Set- top box / Game console D.IN DIGITAL AUDIO IN (OPTICAL) Optical Cable OPTICAL OUT...

  • Page 32: Connecting A Mobile Device

    What is the difference between BT READY and BT PAIRING? • BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before. • BT PAIRING : In this mode, you can connect a new device to the Soundbar.
  • Page 33 Notes on Bluetooth connection • Locate a new device within 3.28 ft (1 m) to connect via Bluetooth communication. • If asked for a PIN code when connecting a Bluetooth device, enter <0000>. • The Soundbar automatically turns off after 18 minutes in the Ready state. •...

  • Page 34: Method 2. Connecting Via Wi-Fi (Wireless Network)

    • To enable this, connect at least two audio devices to the same Wi-Fi network at 5 GHz. • This is available on Samsung Sound devices that support Wi-Fi released year 2024 or later. • This feature does not support TV sound.

  • Page 35: Connecting Via Apple Airplay

    • This Samsung Soundbar supports AirPlay® and recommends that the user use the latest version of iOS, iPadOS, or macOS. • To enable AirPlay in your Soundbar, you must first register the device with the Samsung Smart Things app by agreeing with the app’s terms and conditions.

  • Page 36: Installing The Wall Mount

    08 INSTALLING THE WALL 2. Align the Wall Mount Guide’s Center Line with the center of your TV (if you are mounting the Soundbar below your TV), and then fix MOUNT the Wall Mount Guide to the wall using tape. •...

  • Page 37: Installing The Surround Speakers On A Wall

    Wall Mount Brackets and the speakers on the wall. • Samsung Electronics is not liable for any damage to the product due to the product being installed inappropriately. • Take care not to install the speakers sideways or upside down.

  • Page 38: Software Update

    • This function is not supported by HW-Q700D model. • For the best performance of the microphones, keep the Soundbar Samsung may offer updates for the Soundbar’s system firmware in at least 2 cm away from the TV’s panel. the future.

  • Page 39: Initialization

    • When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device. • For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) → Menu → Settings ( ) →...
  • Page 40 • If your wireless router is new, you will need to reconfigure the • Your device is unable to play the input signal. Change the TV’s speaker’s network settings. (See page 26.) audio output to PCM or Dolby Digital. (For a Samsung TV: • Soundbar does not support Wi-Fi 6. Home ( ) →...
  • Page 41 Copyright © 2012-2021 Dolby Laboratories. All rights reserved. • To enable AirPlay in your Soundbar, you must first register the device with the Samsung Smart Things app by agreeing with the app’s terms and conditions. (See page 27.) • AirPlay does not operate if you delete the Soundbar from the Samsung Smart Things app.

This manual is also suitable for:

Hw-q800dHw-q700d

Table of Contents

Save PDF