Hilti VC 20 Original Operating Instructions
Hide thumbs
Also See for VC 20:
- User manual ,
- Instructions manual (324 pages) ,
- Original operating instructions (301 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hilti VC 20
Summary of Contents for Hilti VC 20
- Page 1 VC 20 / VC 40 English Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
- Page 2 Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
- Page 3 VC 20 / VC 40 Original operating instructions Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
- Page 4 Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
-
Page 5: Information About The Documentation
Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •... - Page 6 The type designation and serial number are printed on the rating plate. ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information...
- Page 7 ▶ Have the appliance serviced by a qualified repair person using only genuine Hilti spare parts. The safety of the appliance can thus be maintained.
- Page 8 ▶ Check to ensure that the supply cord does not lie in a puddle of water. ▶ Check the appliance’s supply cord at regular intervals and have it replaced by Hilti Service if damage is found. Check extension cords at regular intervals and replace them if found to be damaged.
- Page 9 ▶ Avoid contact with alkaline or acidic liquids. If contact accidentally occurs, rinse with water. In the event of the liquid coming into contact with the eyes, rinse the eyes with plenty of water and consult a doctor. Additionally applicable to UL vacuum cleaners ▶...
- Page 10 Description Product overview English Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
- Page 11 • core drilling machines using dry-cutting core bits. • Picking up drilling slurry (mineral materials) from Hilti diamond core bits or Hilti diamond saws and liquids up to a temperature of < 60 °C (140 °F). • Picking up oil or liquid substances with a temperature of up to < 60 °C (140 °F).
-
Page 12: Technical Data
Instructions for use Accessories and how they are used Accessories Type of use PE VC 20 synthetic dust bag (203854) Working with mineral materials, wet and dry PE VC 40 synthetic dust bag (203852) Working with mineral materials, wet and dry... - Page 13 VC 20 VC 40 Protection class IP X4 IP X4 AC frequency 50 Hz … 60 Hz 50 Hz … 60 Hz Rated voltage If the appliance is powered by a generator or transformer, the generator or transformer’s power output must be at least twice the rated input power shown on the rating plate of the appliance.
-
Page 14: Use Of Extension Cords
Noise and vibration information (measured in accordance with EN 60335) The following information applies to all VC 20 and VC 40 industrial vacuum cleaners. Emission sound pressure level (L 73 dB(A) Uncertainty for the sound pressure level (K 2.5 dB(A) Vibration emission value <... - Page 15 Fitting a paper dust bag for picking up wood chips Sharp pointed objects may pierce through the dust bag. Check that no objects have pierced through the dust bag. 1. Disconnect the supply cord plug from the power outlet. 2. Open the two catches. 3.
-
Page 16: Operation
2. Set the switch to the smallest hose diameter if you are using the vacuum cleaner with a Hilti hollow drill bit system. - Page 17 1. Check the container level monitoring system. → page 15 2. If possible, use a separate filter element for wet applications. The Hilti VC 20/40 universal (2121387) filter is recommended. 3. After picking up liquids, open the two catches. 4. Lift the vacuum cleaner top section away from the waste material container and place it on a level surface so that the filter element can dry.
-
Page 18: Care And Maintenance
▶ The appliance must be subjected to a technical inspection by Hilti Service or a trained person at least once a year to check, for example, for damage to the filter, air leakage, and to ensure correct operation of controlling devices. - Page 19 2. Open the filter cover catches. 3. Open the filter cover. 4. Carefully remove the filter element, gripping it at the areas provided in the holder. 5. Clean the sealing surface with a cloth. 6. Fit the new filter element. 7.
-
Page 20: Troubleshooting
Disposal Most of the materials from which Hilti products are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information. -
Page 21: Manufacturer's Warranty
▶ Dispose of the drilling dust collected by the vacuum cleaner in accordance with the applicable national regulations. Manufacturer’s warranty ▶ Please contact your local Hilti representative if you have questions about the warranty conditions. English Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01... - Page 22 English Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
- Page 23 Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
- Page 24 Hilti = registered trademark of Hilti Corp., Schaan 20180823 Printed: 29.08.2018 | Doc-Nr: PUB / 5370888 / 000 / 01...
Need help?
Do you have a question about the VC 20 and is the answer not in the manual?
Questions and answers