Table of Contents
Advertisement
3. Image Optimization
• "Show Me" starts the color calibration
tutorial.
• "Start" - starts the 6-step color calibration
sequence.
• "Quick View" loads the before/after images.
• To return to "Color" home pane, click the
"Cancel" button.
• "Enable color calibration" is on by default.
If unchecked, color calibration will not be
function. It dimes out "Start" and Quick
View" buttons.
• The patent information must be on the
calibration screen.
First color Calibration Screen:
• "Previous" is disabled until the second color
screen.
• "Next" goes to the succeeding target, there
are a total of 6-targets.
• "Final" goes to "File>Presets pane".
• "Cancel" closes the UI and returns to the
plug in page.
Options>Preferences - Will only be active
when selecting Preferences from the drop-
down Options menu. On a non-supported
display capable of DDC/CI, only the Help and
Options tabs are available.
• "Preference" displays current preference
settings.
• A
checked box enables the feature.
• Enable Context Menu on desktop is
checked (On) by default. Enable Context
menu displays SmartControl Lite selections
for Select Preset and Tune Display in the
desktop right-click context menu. Disabled
removes SmartControl Lite from the right
click context menu.
• Enable Task Tray icon is checked (On) by
default. Enable context menu shows the
task tray menu for SmartControl Lite. A
right click on the task tray icon displays the
menu options for Help, Technical Support,
Check for Update, About, and Exit. When
Enable task tray menu is disabled, the task
tray icon will only display EXIT.
• Run at Startup is checked (On) by default.
When disabled, SmartControl Lite will not
launch at start or be in the task tray. The
only way to launch SmartControl Lite is
either from the desktop short cut or from
the program file. Any preset set to run
at startup will not load when this box is
unchecked (Disabled).
• Enable transparency mode (Windows 7,
Windows 8.1). Default is 0% Opaque.
12
Advertisement
Table of Contents
