Tools Required; Power Unit Requirements; Unpacking Your Attachment; Torque Requirements - Jrco 753 Operator's Manual

Socket Wrench: 9/16" & ¾"

2.3 Tools Required

Open or Box Wrench: 9/16" & ¾"
•
Pliers
•
Allen Wrench: 5/32"
•
Grease gun
•
•

2.4 Power Unit Requirements

The Hooker Soft-Plug Aerator is designed to be attached to the JRCO hitch for mounting on zero
turn mowers, UTVs and lawn tractors.
2.5

Unpacking Your Attachment

CAUTION
Sharp edges
Heavy
Your Hooker Aerator will ship in 2 boxes. Carefully set the boxes on a flat working area. Carefully
unbox the attachment and verify that all fasteners and components are included.
Please reference the Torque Chart below for correct values when assembling your attachment.

2.6 Torque Requirements

3/8"
¼"
This attachment is shipped partially assembled. If purchased from a JRCO Dealer, the dealership

2.7 General Assembly

may assist in assembly of attachment. Review all safety and assembly instructions in this manual
before assembly.
20195 South Diamond Lake Road, STE 100
Rogers, MN 55374
800.966.8442
MODEL 753
HH Bolts and Nuts
HH Bolts and Nuts
Operator's Manual
30 ft.-lbs.
8 ft.-lbs.
10