Table of Contents
Advertisement
Approvals
Device
SCALANCE XM416-4C
* In modular devices, you can find the marking in the operating instructions for the plug-in transceiver
or extender used.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Mechanical stability (in operation)
Device
SCALANCE XM408-4C
SCALANCE XM408-8C
SCALANCE XM416-4C
* Note: When installing on an S7-300 or S7-1500 standard rail
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
• "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
support.industry.siemens.com/cs/ww/en/view/27069465)
• "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
support.industry.siemens.com/cs/ww/en/view/84922825)
• "EMC Installation Guidelines" configuration manual
support.industry.siemens.com/cs/ww/en/view/60612658)
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their target
systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
86
CAUTION
IEC 60068-2-6 vibration *
5 - 9 Hz: 3.5 mm
9 - 150 Hz: 1 g
1 octave/min, 20 sweeps
●
●
●
WARNING
CLASS 1 LASER Product
IEC 60068-2-6 vibration
10 - 58 Hz: 0.075 mm
85 - 150 Hz: 1 g
1 octave/min, 20 sweeps
●
●
●
(https://
Operating Instructions, 03/2021, C79000-G8976-C306-10
(*)
IEC 60068-2-27 shock
15 g, 11 ms duration
6 shocks per axis
●
●
●
(https://
(https://
SCALANCE XM-400
Advertisement
Table of Contents
