Resets - Philips Brilliance 181AS User Manual

How to Use the On Screen Display (OSD)
User Presets
User Presets
Fllow the steps below to set a custom color temperature. You can make individual adjustments for each color.
You will now be back at the E
8
window. See S
for options.
7 To exit U P
SER RESET
Next, press the OSD button again to return to E
6
When done with green, press
the OSD button. B
LUE
highlighted. Then, turn the
R knob to increase or
OTARY
decrease the blue.
Smart Help
After returning to Exit . . .
. . . to continue to User Preset 2, repeat steps 3 through 7, selecting U
. . . to continue to Language, turn the R
steps e - 5 under L on the next page.
ANGUAGE
. . .to exit the On Screen Display completely, press the OSD button and choose either S
button to exit OSD. (See page 23 for other exit options.)
Third window
Press the OSD button.
1
2
2
Turn the R knob until one of the
OTARY
U P icons is highlighted.
SER RESET
XIT
H below
MART ELP
1 , press the OSD button.
XIT
window.
5
When done with red, press the
OSD button. G
will be
highlighted. Then, turn the
R knob to increase or
OTARY
decrease the green.
knob until L
OTARY ANGUAGE ICON
: Adjustment of the colors red,green and blue.
: Adjustment of the colors red,green and blue.
9
9
Press the OSD button to
bring up SAVE screen.
Turn the Rotary Knob to select
Yes to save changes or No to
discard changes. Then, press the
OSD button to confirm your
choice and Exit the OSD.
4
First, R
will be
REEN
press the OSD button again.
Then, turn the R
increase or decrease the red.
P 2.
SER RESET
is highlighted. Next, press the O
or Don't S
AVE
19
3
If necessary,
turn the R
knob until
of the U
SER
P is

RESETS

highlighted.
Next, press the
OSD button to
confirm the
selection.
will be highlighted.
ED
Next, to adjust the red,
knob to
OTARY
S D button. Now, follow
N CREEN ISPLAY
in setting mode, then push OSD
AVE
E
N
OTARY