How To Load Software For Main P.w.board - Sanyo DVD-SL40 (XE) Service Manual

All manuals and user guides at all-guides.com
MECHANISM REPLACEMENT
4. Tray parts.
5. Base mechanism mounting parts.
G-SANKOL
G-SANKOL
A
G-SANKOL
(Type A)
G-SANKOL
A
A
: Clean the groove by alcohol well.
(Type B)

HOW TO LOAD SOFTWARE FOR MAIN P.W.BOARD

1. Power on, then open tray.
2. It take on CD-ROM (Part code is "0PRADC7123--A") for UPDATE software to the tray, and tray close.
3. It is displayed on a TV screen as "FLASH".
4. It is displayed on a TV screen as "dvdsl40.San" or "dvdsl40t.San"
5. It is displayed on a TV screen as "reading".
6. A TV screen becomes dark.
4. The display of a TV screen repeats "ERASE" and "WRITE"
5. It is displayed on a TV screen as "DONE" and Power off.
- 3 -