How To Load Software For Mpeg P.w.board - Sanyo DVD-SL20V Service Manual

SERVICE MODE
D. IMPORTANT NOTE
1. Once the "Market/Region" settings are written into EEPROM (IC801) on the DVD substrate, they cannot be reset.
(However, updating the system using CD-R enables you to make new settings.)
2. While the Internal Setup screen is displayed, pushing the Power button enables you to terminate the operations without
making any settings.

HOW TO LOAD SOFTWARE FOR MPEG P.W.BOARD

1. Power on, then open tray.
2. It take on CD-ROM for UPDATE software to the tray, and tray close.
3. Display " UP DATE" in the TV screen.
4. For the time being, tray open and FL display remain "UP DATE".
5. When software loading finished, FL display "STANDBY".
6. Next, set up market code and region code by "SERVICE MODE"
CD-ROM part code is "0PRADC7114--AJ".
- 10 -