Wps; Uninstall The Drivers & Client Utility - EnGenius EPI-9701 User Manual

EUB9701/9702 and EPI-9701series --IEEE802.11b/g/n Wireless LAN Client Adapter
BSSID: Displays the MAC address of the Access Point.
Signal: Displays the receiving signal strength from the Access Point.
Channel: Displays the channel number of the Access Point.
Rescan: Click on this button to view a list of Access Points in the area.
Connect: to connect with a specific Access Point, select the SSID from
the list, and then click on the Connect button.
Add to Profile: Click on this button to add the SSID and its associated
settings into a profile.
Click on the OK button if you have made any changes.

2.7 WPS

Click on the WPS Configuration tab. WPS (Wireless Push Button) is used for
WiFi Protected Setup. By pressing this button, the security settings of the device
will automatically synchronize with other wireless devices on your network that
support Wi-Fi Protected Setup.
Rescan: Click on this button to view a list of Access Points in the area.
Click on the OK button if you have made any changes.
2.8 Uninstall the Drivers & Client Utility
If the USB client adapter installation is unsuccessful for any reason, the best way
to solve the problem may be to completely uninstall the USB adapter and its
utility and repeat the installation procedure again.
Follow the steps below in order to uninstall the client utility:
1. Click on Start > EnGenius Wireless > Uninstall EnGenius Wireless USB
Adapter
Version 1.0
18