Profiles; Infrastructure Mode - EnGenius EPI-9701 User Manual

Ieee802.11b/g/n wireless pci adapter

Table of Contents

EUB9701/9702 and EPI-9701series --IEEE802.11b/g/n Wireless LAN Client Adapter

6. An EG icon will then appear in the system tray. Right click on the EG icon and

then click on Launch Config Utilities.

Note: Click on Use Zero Configuration as Configuration Utility if you would

like to use Windows Zero Config.

2.3 Profiles

The Profile tab is used to store the settings of multiple Access Points such as

home, office, café, etc. When adding a profile you are required to enter a profile

name and SSID as well as configure the power-saving mode, network type,

RTS/fragmentation threshold and encryption/authentication settings.

can be configured as Infrastructure or Ad-hoc mode. The configuration settings

for

each

The infrastructure mode requires the use of an Access Point (AP). In this mode,

all wireless communication between two computers has to be via the AP. It

doesn't matter if the AP is stand-alone or wired to an Ethernet network. If used in

stand-alone, the AP can extend the range of independent wireless LANs by

mode

are

Version 1.0

A profile

described

below.

Table of Contents