Pyle PDWM91 User Manual

PDWM91
Professional VHF Handheld Microphone
Pro Audio Wireless Mic Transmitter System with Adapter Receiver
INSTRUCTIONS
RECEIVER
Battery Cover
OFF
ON
LED
ANT
Handheld Transmitter
Grill
HOW TO USE?
1. Open the battery cover of the receiver, put 1AA battery inside the battery compartment. Make sure the "+ -"
polar is correct.
2. Turn ON/OFF swith to ON, the LED indicator is lit. Then insert the 1/4"(6.3mm) Input Jack into audio input
socket, the LED indicator is become brighter after receiving RF signals.
3. Install 2PCS AA batteries correctly in handheld transmitter or install 1PC 9 V battery correctly into the belt-
pack transmitter. Install the headset microphone to the beltpack input transmitter.
4. Turn ON the transmitter switch, the LED indicator is lit. Now the system is ready to use
Notice:
1. If there is any noise, distortion, dead points when using the this system, it may be caused from low battery,
please replace with new battery.
2. After using it, please turn the switch to "OFF".
3. If you will not use this system for a long time, please take out the batteries.
www.PyleUSA.com
1/4"(6.3mm) input Jack
ON/OFF switch
LED indicator