Table of Contents
Advertisement
Standard Repair Process Detail Technical Manual
symptom
Content
P2201, P2202
Checking order when there is no audio
1. Check the contact condition of or 20V connector of Main Board.
2. Measure the 20V input voltage supplied from Power Board.
(If there is no input voltage, remove and check the connector.)
3. Connect the tester RX1 to the speaker terminal and if you hear the 'Chik~ Chik~'
sound when you touch the GND and output terminal, the speaker is normal.
Error
C. Audio error_No audio/Normal video
Voltage and speaker checking method
when there is no audio
②
Established
date
Revised
date
①
A12
Copyright © 2019 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
A13
Advertisement
Table of Contents
