LG OLED88Z9PTA Service Manual page 18

(2-1) Unscrew the Sound Reflector Fixation Screw(B) 2EA on the underside of a stand-top.
(2-2) Push the front protrusion of the Sound Reflector upwards to separate it from the stand.
* The Sound Reflector is attached to the stand only by a magnet. Thus, Make sure that the Sound Reflector does not fall off to the
floor when it is removed.
2-1
2-2
Sound Reflector
(3-1) Unscrew the Shaft(C) 4EA on the underside of a stand-top. (Use hexagonal wrench)
* The Shaft(C) is not completely separated from the Stand. (The Shaft(C) is fixed to the Stand by washer.)
3-1
C
C
C
Sound Reflector
C
C
- 18 -
The Shaft is fully released status.
(※ The Shaft is not separated from the Stand)
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes.
B