Seagate Surveillance HDD Product Manual page 8

Table of Contents

Advertisement

Table 1
Drive specifications summary for 6TB and 5TB models
Drive Specification*
Relative humidity gradient (max)
Wet bulb temperature (max)
Altitude, operating
Altitude, non-operating
(below mean sea level, max)
Operational shock (max)
Non-operational shock (max)
Vibration, operating
Vibration, non-operating
Drive acoustics, sound power
Idle***
Seek
Non-recoverable read errors
Mean Time Between Failure (MTBF)
Rated Workload
Warranty
Load/unload cycles (25°C, 50% rel. humidity)
Supports hotplug operation per the
Serial ATA Revision 3.2 specification
*
All specifications above are based on native configurations.
**
One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification,
which may increase acoustic and power to operational levels.
Seagate does not recommend operating at sustained case temperatures above 60°C.
Operating at higher temperatures will reduce useful life of the product.
Seagate Surveillance HDD Product Manual, Rev. B (Draft 2)
29°C max (nonoperating)
2Hz to 22Hz: 0.25 Gs, Limited displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
350Hz to 500Hz: 3.0 Gs
Average annualized workload rating: <180 TB/year.
The AFR specification for the product assumes the I/O workload does not exceed
the average annualized workload rate limit of 180 TB/year. Workloads exceeding
the annualized rate may degrade the product AFR and impact reliability as
experienced by the particular application. The average annualized workload rate
limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the
following web page:
http://www.seagate.com/support/warranty-and-replacements/
From this page, click on "Is my Drive under Warranty". Users will be asked to
provide the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for the drive.
300,000 at 25°C, 50% rel. humidity
ST6000VX0003
30% per hour
26°C max (operating)
–304m to 3048m
(–1000 ft to 10,000 ft)
–304m to12,192m
(–1000ft to 40,000+ ft)
70 Gs at 2ms (read)
40 Gs at 2ms (write)
250 Gs at 2ms
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
2.7 bels (typical)
2.8 bels (max)
2.8 bels (typical)
2.9 bels (max)
^
1 per 10
15 bits read
1,000,000 hrs
Yes
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

St6000vx0003

Table of Contents