Table of Contents
Advertisement
OXY0904
M2 Custom Nut
Swash Plate Assembly
( Box1/Bag18 )
Center Ball
Page 25
TCEM2X20-
M2X20 Hex Cap Screw
OXY0757-
Main Grip Bushing
DFC Arm
OXY0020-M1.2x2
Special Screw
Lower and Upper
Swash Plate
Important Note:
this part, for tuning reasions,
comes factory pre assembled,
it ready to use.
Important Note:
This part comes pre assembled
WITHOUT thread lock. Follow
the instruction for final assembly
Once you finish assembly, ensure the DFC
Arms can rotate without friction. If the DFC
Arms are assembled correctly, rotation
should be smooth and without friction. In
case of any friction, recheck each
component and re-assembly as necessary.
Important Note:
This part comes pre assembled WITHOUT
thread lock. Follow the instruction for final
OXY0043 -
assembly.
Linkage Ball
Swivel Ball Note:
OXY0019 -
The Swivel Ball is pre-assembled with a
Swash Plate Ball
precise fitting. When new, the Swash Plate
center ball will have a little friction. After a
few flights and "break-in" it will come smooth,
keeping the best precision without play.
Chapter 11: Main Rotor Assembly
OXY0018-2x
11.5 Anti Rotation Pin
Advertisement
Table of Contents
