How To Initialize The Dvd Recorder - Sylvania SSR90V4 Service Manual

HOW TO INITIALIZE THE DVD RECORDER

To put the program back at the factory-default, initialize
the DVD recorder as the following procedure.
1. Turn the DVD recorder on.
2. Confirm that no disc is loaded or that the disc tray
is open. To put the DVD recorder into the Version
display mode, press [CM SKIP], [1], [2], and [3] but-
tons on the remote control in the order.
Fig. A appears on the screen.
Model Name :
Firmware Version
BE : R1F189000E
FE : NRS0051 MST031210
DEFAULT SETTING : ENTER
EXIT : RETURN
*1: " ******* " differ depending on the models.
*2: Firmware Version differ depending on the models,
and indication is one example.
Fig. A: Version Display Mode Screen
3. Press [ENTER] button, then the DVD recorder
starts initializing. When the initializing is completed,
the DVD recorder exits the Version display mode
and turns off the power automatically.
* To move into the Normal mode from the Version
display mode, press [RETURN] button on the
remote control instead of [ENTER] button.
* When [POWER] button is pressed before [ENTER]
button is pressed, the DVD recorder exits the Ver-
sion display mode, then the power turns off.
*******
1-7-7 E9412DC