Installation Cont'd
Under Table Mounting
Use the two (2) included brackets and four (4) Phillips pan head screws. Brackets can be attached to the unit either outward-facing or
inward-facing, as shown. Screw and anchor hardware for mounting the brackets to the surface is pictured but not included.
TIP: If a semi-permanent installation is desired, use the bracket keystone holes in conjunction with screws tightened loosely to the
brackets to allow for easy slide-on and slide-off of the unit.
Outward-Facing Brackets
Inward-Facing Brackets
Inward-Facing Brackets, Slide-In
8