Important Safety Instructions - Q-SYS NV-21-HU Hardware User Manual

4k60 network video endpoint for q-sys
Table of Contents

Advertisement

The term "WARNING!" indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily
injury or death.
The term "CAUTION!" indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it
may result in damage to the equipment that may not be covered under the warranty.
The term "IMPORTANT!" indicates instructions or information that are vital to the successful completion of the procedure.
The term "NOTE" is used to indicate additional useful information.
The lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within
the product's enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this
manual.
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
• Elevated Ambient Operating Temperature – If installed in a closed or multi-unit assembly, the ambient operating
temperature of the rack environment may be greater than room ambient. Ensure that the maximum operating temperature
range is not exceeded. Refer to the "FCC Statement" section.
• Reduced Air Flow – Installation of the equipment should be such that the amount of air flow required for safe operation
of the equipment is not compromised.
1.
Read, follow, and keep these instructions.
2. Heed all warnings.
3. Do not use this apparatus near water.
4. Do not submerge the apparatus in water or liquids.
5. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
6. Clean only with a dry cloth.
7.
Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
8. Keep all ventilation openings free of dust or other matter.
9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
10. Do not unplug the unit by pulling on the cord, use the plug.
1 1. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14. Adhere to all applicable, local codes.
15. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
EXPLANATION OF TERMS AND SYMBOLS

IMPORTANT SAFETY INSTRUCTIONS

2

Advertisement

Table of Contents
loading

Related Products for Q-SYS NV-21-HU

Table of Contents