Table of Contents
Advertisement
Connections and Callouts
Front Panel
Power LED – Illuminates blue when the NV-21-HU is powered on.
1.
2. ID Button – Locates the NV-21-HU in Q-SYS Designer Software and Q-SYS Peripheral Manager.
3. ID LED – Blinks green when placed into ID Mode via ID Button or Q-SYS Peripheral Manager.
Rear Panel
1
2
External Power Input – Auxiliary power, 12VDC, 9A. Uses a 2-pin Euro connector (not included).
1.
2. LAN / PoE – RJ-45 connector, 2.5GbE, 802.3bt Type 3 Class 5 (45W from PSE, 40W at NV-21-HU). For connection to
Q-LAN.
3. USB-A – USB 3.0 Type-A Host Port. Supports 5VDC @ 900mA max.
4. RS232 – Serial Transmit and Receive. Uses the black 3-pin Euro connector.
5. Reset Button – Use a paper clip, or similar tool, to press and hold the reset button for 10 seconds to reset the NV-21-HU to
factory values.
6. USB-C – USB 3.2 Gen 1x1 (5Gbps) Type-C Device Port, supporting DisplayPort Alt-Mode (DP 1.4 Sink) and USB Power
Delivery up to 65W.
HDMI In – HDMI 2.0 Input with support for HDCP 2.3 and HDCP 1.4.
7.
8. HDMI Out – HDMI 2.0 Output with support for HDCP 2.3 and HDCP 1.4.
3
4
5 6
1
2
3
7
8
6
Advertisement
Table of Contents
