Maintenance - Prokonian SPCT-500-P Instruction Manual

6. Override mode – This mode allows you to temporarily CHANGE the preset
temperature in WORK MODE or PROGRAMMING MODE.
Press the MODE + DOWN buttons; the display will flash. Press the UP or DOWN
button to set the override temperature.
Press the MODE + DOWN buttons or MODE again to enter the override temperature.
The convector is now working under the OVERRIDE temperature.
If the OVERRIDE temperature is set under the PROGRAMMING MODE, the
convector will only work at that OVERRIDE temperature under the current
program (e.g. P1). When the program automatically proceeds to the next
program (P1 >> P2) the OVERRIDE MODE will be cancelled and return to the
preset temperature of the current program (e.g. P2).
If you want to cancel OVERRIDE mode, press MODE + DOWN button and the
convector will return to WORK MODE or PROGRAMMING MODE.
Query of continuous heating time – Press the MODE button for 5 seconds; the
7.
display will show the total heating time for the current day.
Press the MODE button again for 5 seconds; the display will show the total heating
time of the week.
8. Resume factory setting for P1 – P4 – To restore the factory setting of P1 to
P4, press the UP button for 10 seconds (the current time and week will not be
changed).
Factory setting:
P1 morning
P2 daytime
P3 evening
P4 night
Complete restore of the digital control – Press DOWN button for 10 seconds and
the program and time will be resumed to factory setting.
9. In the summer or whenever the convection heater will not be used for an
extended period of time, turn OFF the convector at the main switch panel (or
circuit breaker).

MAINTENANCE

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, ALWAYS SWITCH OFF THE
UNIT AT THE MAIN SWITCH BOARD/MAIN DISCONNECT PANEL AND WAIT 10 MINUTES TO
ALLOW IT TO COOL BEFORE ATTEMPTING ANY MAINTENANCE OR CLEANING.
We recommend cleaning the heater periodically in order to avoid dust blocking the grill
and allow proper ventilation.
CLEANING
Wipe the unit with a soft damp cloth. Do not use abrasive cleaners or spray liquids on
the unit surfaces.
Note: It is possible that the unit surface may discolour (yellow) over time, due to dust
or cigarette smoke. This is normal and not a manufacturing defect.
4
6:00 AM 20.5°C 69°F
8:00 AM 17.5°C 64°F
5:00 PM 21.0°C 70°F
10:00 PM 17.0°C 63°F