Hitachi PV-XH3M Instruction Manual page 32

Rotary brush maintenance
Remove the brush holder.
Flip over the mini power brush and turn on the cover.
Detach the rotary brush and remove dust and debris.
Remove dust and debris
Rotary brush
Do not use cleansers, bleach, etc. Doing so might cause discoloration, deformation, etc.
Note
If the rotary brush has been washed with water, attach it after thoroughly drying it naturally in
the shade.
Drying it requires approx. 24 hours. (The drying time may differ depending on the
environment or season.
Adjust the rotary brush with the groove and attach it to its original position.
Adjust the rotary brush with the groove.
Attach the brush holder.
Push the cover to firmly.
Cover
When attaching the brush holder, fasten the hook first. Failure to do so might cause damage.
Note
EN-32
Cover
Tweezers
Remove dust and
debris tangled in the
groove using
tweezers, etc.
Scissors
Cut and remove dust
and debris tangled in
the rotary brush
using scissors, etc.
Attach it to its original position.
Groove
Turn off the cover.
The rotary brush
can be washed
with water.
Groove