Emptying The Dust Case - Hitachi PV-XH3M Instruction Manual

Emptying the dust case (continued)
Remove attached dust and debris.
Remove the dust and debris and
fine dust and debris using soft
cloths, etc.
Close the dust case lid.
Dust case lid
Emptying the dust case [when removed from the vacuum cleaner]
Hold the dust case and pull the
dust case release button.
Pull
Do not detach the dust case with the vacuum cleaner set down. Dust and debris might spill.
Note
If dust and debris spills inside the vacuum cleaner, remove the dust and debris and attach the
dust case as it was.
Do not turn the dust and debris collection inlet downward when holding the dust case or placing it.
Dust and debris might spill.
Close until you hear a "click" sound.
Click
Dust case
release button
CAUTION
Risk of damage
You might have unintentionally
vacuumed sharp objects such
as glass shards or pins. Be
careful when performing
maintenance.
Note
In order to maintain strong
sucking power, regularly
perform frequent maintenance
→
of the filter.
EN-24, EN-27)
Pull out the dust case in the
arrow direction.
Pull
(P.EN-23,
Dust and debris
collection inlet
Dust case
EN-21