Panasonic nanoe EH-NA9K Operating Instructions Manual page 5

WARNING
Do not store or use the cord in a twisted state.
- Doing so may cause breakage to the wire in
the cord, leading to electric shock or fire due to
a short circuit.
Always unplug the appliance by holding the plug
instead of the cord.
- Failure to do so may cause breakage of the
cord, or result in burning, electric shock, or fire
due to a short circuit.
Regularly clean the plug to prevent dust from
accumulating.
- Failure to do so may cause fire due to
insulation failure caused by humidity.
Disconnect the plug and wipe it with a dry cloth.
After using the appliance, be sure to set the
power switch to [ O ], and unplug the appliance
from the household outlet.
- Failure to do so may cause burning or fire.
Fully insert the plug.
Always ensure the appliance is operated on an
electric power source matched to the rated
voltage indicated on the appliance.
Independently use a household outlet, and do not
use an extension cord.
- Failure to do so may cause electric shock or
fire.
EH-NA9K 香港向1222.indb 5
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
- Failure to do so may cause an accident or
injury.
In case of an abnormality or malfunction
Immediately stop using and remove the plug if
there is any abnormality or malfunction.
- Failure to do so may cause fire, electric shock,
or injury.
<Abnormality or failure cases>
• Air is not emitted.
• The appliance stops sporadically.
• The interior gets red, and smoke comes out.
• The main body is damaged or deformed, and a
noise is heard from the inside.
- Immediately contact a service center
authorized by Panasonic.
Maintenance
When the appliance emits hot air,
if sparks are seen at the air outlet,
immediately stop using it, and then
clear away dust adhered to the air
outlet and air inlet.
- Failure to do so may cause
burning or fire.
5 5
2023/1/3 16:34:04