Panasonic nanoe EH-NA9K Operating Instructions Manual page 13

Cleaning the air inlet
Wipe to clean dust or hair from
the air inlet with a tissue or
toothbrush.
Note
Do not press or rub with your nails or sharp items.
Doing so may cause damage to the air inlet.
Cleaning the air outlet
1. Insert the plug into a household outlet.
2. Set the power switch to [ Ⅰ ], [ Ⅱ ]
or [ Ⅲ ].
3. Select [COLD] with the mode switching
button.
4. While scraping dust and hair jammed
in the mesh with a cotton swab, blow
them away with a hair dryer.
Note
During maintenance, do not block the air inlet with your
hand.
Notice
Dust will disperse during or after cleaning. Before using
the appliance, be sure to check that there is no dust.
(Do not look into the air outlet.)
At least once a month
EH-NA9K 香港向1222.indb 13
nanoe™ outlet
Mineral ion outlet
In order to maintain the generation amount of nanoe™
and mineral ions.
1. Wet the front end of a new
baby cotton swab with
water.
2. Gently insert the cotton
swab in the outlet until it
stops (about 1 cm), and
then turn the cotton swab
2-3 times carefully.
→ If cotton swabs or any
other foreign objects enter
the ion outlet, please stop
using the appliance
immediately and consult an
authorized service center.
Clean the dirt if any in the following way
Cleaning the main body
Soak a cloth in the soapy water and
squeeze it out firmly, and then wipe the
main body with the cloth.
Notes
Do not use substances such as
alcohol, nail polish remover or
detergent (hand soap). Doing so may
result in malfunction or part cracks or
discoloration.
Do not store the appliance
with hairdressing appliances or
cosmetics on it. Doing so may cause
deterioration of the plastic, leading to
discoloration and cracks.
Mineral ion
outlet
nanoe™ outlet
nail
alcohol
polish
remover
13 13
2023/1/3 16:34:07