Power Requirements - Bluebell BC368 Operation Manual

Power requirements

Power supply requirements are dictated by the enclosure type used.
BC100 modular frames:
These may be fitted with either one or two AC mains PSU modules (number specified at time of
order). Each module has sufficient capacity to power a fully-loaded frame. The AC connection
is via standard IEC cables, DC power distribution inside the frame is via the motherboard. See
the Operation Guide supplied with the frames for more details.
BC160 modular frames:
These are fitted as standard with dual internal AC mains power supplies, each of sufficient
capacity to power a fully-loaded frame. The AC connection is via standard IEC cables, DC
power distribution inside the frame is via the motherboard. See the Operation Guide supplied
with the frames for more details.
BC101 and BC102 single- and dual-slot chassis:
These are supplied with an external Universal AC adaptor which connects to the chassis via a
flying lead terminated in a 4-pin locking XLR connector. Mains is via an IEC connector.
BC120 triple-slot chassis:
This housing for three plug-in modules is fitted with an internal AC mains supply; mains
connection is via a rear IEC connector.
BC368-OperationGuide-v1 5