External Monitoring; Bc100/160 Frame Panel Leds; Monitoring Via Webpages - Bluebell BC368 Operation Manual

External monitoring

All modules in the Bluebell modular range can report their status to the frame in which they are
housed. The frame's LEDs (two per module) will confirm correct operation (or otherwise), and
if the optional SNMP/Ethernet interface module is fitted, remote monitoring is also available.
Contact Bluebell for the relevant .mib file.

BC100/160 Frame Panel LEDs:

Green
LED A
Red
Green
LED B
Red

Monitoring via webpages:

"Overview" webpage:
Green
Ch A
LED
Red
Green
Ch B
LED
Red
"Frame Information" webpage:
"good"
Ch A
"fail"
"unknown"
"good"
Ch B
"fail"
"unknown"
BC368
Signal detected by SFP 1 at
Rx (lower) port
No signal detected by SFP 1 at Rx
(lower) port
Signal detected by SFP 2 at
Rx (lower) port
No signal detected by SFP 2 at Rx
(lower) port
BC368
Signal detected by SFP 1 at
Rx (lower) port
No signal detected by SFP 1 at Rx
(lower) port
Signal detected by SFP 2 at
Rx (lower) port
No signal detected by SFP 2 at Rx
(lower) port
BC368
Signal detected by SFP 1 at
Rx (lower) port
No signal detected by SFP 1 at Rx
(lower) port
Module not detected in this slot
Signal detected by SFP 2 at
Rx (lower) port
No signal detected by SFP 2 at Rx
(lower) port
Module not detected in this slot
BC368D
Module present
(Never - not used)
Module present
(Never - not used)
BC368D
Module present
(Never - not used)
Module present
(Never - not used)
BC368D
Module present
(Never - not used)
Module not detected in this slot
Module present
(Never - not used)
Module not detected in this slot
BC368-OperationGuide-v1 14