Bluebell BC368 Operation Manual page 2

Multi-format interfaces
Table of Contents

Advertisement

Bluebell Opticom Ltd.
Unit 2, The Quadrant
Howarth Road
Maidenhead
Berkshire
SL6 1AP
United Kingdom
Tel: +44 (0) 1628 510055 / Fax: +44 (0) 1628 510057
Email:
support@bluebell.tv
Please note that all documentation herein is of a confidential nature and may not be
reproduced without written confirmation from Bluebell Opticom Ltd. The technical descriptions
and schematics are to aid service and repair only. Dissemination to a third party or parties will
constitute breach of copyright.
Information in this document is subject to change without notice and does not represent a
commitment on the part of Bluebell Opticom Ltd.
Bluebell Opticom Ltd. has taken all possible steps to ensure that the information given here
is both correct and complete. In no event can Bluebell Opticom Ltd. accept any liability or
responsibility for any loss or damage to the owner of the equipment, any third party, or any
equipment which may result from use of this manual or the equipment which it describes.
Declaration of Conformities
Bluebell Opticom Ltd. hereby declares that the BC368 and BC368D Fibre Optic Transmission
Equipment is in compliance with the essential requirements and other relevant provisions of
the following EU directives: 89/336/EEC and has been assessed to EN55022B (European
limits and methods of measurement of radio disturbance characteristics); EN61000-4-2,
EN61000-4-4 (Level 2), EN61000-4-4FTB, EN61000-4-5 and EN61000-4-11 (EMC);
EN61000-6-1, EN61000-6-2, EC61000-6-3 and EC61000-6-4 (Immunity to electrical
emissions). Class 1 Laser Safety compliant: additional conformities are dependent on SFP
cartridges fitted.
RoSH and WEEE declaration
Bluebell Opticom Limited manages its business and collaborates with its suppliers to comply
with the European Union restriction of the use of certain hazardous substances in electrical
and electronic equipment, RoSH Directive (2002/95/EC), that came into force on 1st July 2006,
and similar restrictions in other jurisdictions.
The "crossed out wheelie bin" symbol on the product and represented above is there
to remind users of the obligation of selective collection of waste. This label is applied
to various products to indicate that the product is not to be thrown away as unsorted
municipal waste. At the end of life, dispose of this product by returning it to the point of
sale or to your local municipal collection point for recycling of electric and electronic devices.
Customer participation is important to minimize the potential effects on the environment and
human health that can result from hazardous substances that may be contained in this product.
Please dispose of this product and its packaging in accordance with local and national
disposal regulations, including those governing the recovery and recycling of waste electrical
and electronic equipment. Contact your local waste administration, waste collection company
or dealer.
/ Web:
www.bluebell.tv
BC368-OperationGuide-v1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bc368d

Table of Contents