Gaumard NOELLE S554.100 User Manual page 20

Turning on the Simulator with OMNI Link
1. Disconnect the RF module
from the UNI tablet/PC.
2. Double click the UNI icon and
select the correct simulator
profile. Ensure you are using UNI
version 2.46.2 or newer.
3. Upon software startup, a warning message will
appear stating that the RF Module was not found.
Click OK.
NOTE: This is the warning message that appears
for the first time use of the OMNI Link with the
simulator.
NOELLE S554.100 | User Manual
Equipment Setup | 11b