Gaumard NOELLE S554.100 User Manual page 19

Initializing the Simulator with UNI & OMNI Link
Noelle also has the capability to connect to its USB tablet/PC via a
Bluetooth connection provided by an OMNI Link Wireless Adapter Kit.
It is strongly recommended to connect to the simulator using the
OMNI Link for optimal audio quality when using the simulator's
streaming audio features.
The OMNI Link Wireless Adapter Kit began shipping as standard with
Noelle serial number M2107588 and above. Simulators with serial
numbers lower than M2107588 will need to have the RJ45 port
modified.
For simulators without the OMNI Link Wireless Adapter Kit, refer to
the instructions above on connecting to Noelle using the USB RF
module.
To initialize Noelle using the OMNI Link:
1. Remove the OMNI Link from its package.
2. Plug the OMNI Link into the RJ45
port on the simulator's side.
3. Press the power button on the OMNI Link to enable Bluetooth.
NOTE: It will flash green when ready.
11a | Equipment Setup
NOELLE S554.100 | User Manual