Asko TDC177XV User Manual page 32

Drying process, step by step
STEP 7: End of program
After the end of the drying program, the display will indicate that the drying has been finished.
If you have selected the "anti-crease" option, the dryer will continue to operate after the end of the
drying cycle.
Open the door towards you and remove the laundry from the dryer.
Clean the net filter in the door (see chapter "Cleaning and maintenance").
Make sure the dryer drum is empty, then close the door.
5 minutes after the end of the program or last activation, the display will switch off to standby mode
in order to save power.
The display will light up again if you press the ON/OFF button or open the dryer door.
INFORMATION!
After each drying cycle, clean the net filter in the door. See chapter "Cleaning and maintenance".
HOT SURFACE!
A clogged net filter may result in activation of the automatic overheating switch-off device. Clean
the filter, wait for the machine to cool down, and try running it again. If the dryer still fails to start,
call a service technician.
WARNING!
After the drying process, unplug the dryer power cord from the power outlet.
If you have a tumble dryer with a 3-phase connection, do not pull the plug out of the power outlet.
32