Philips FW-D1 Manual page 9

Mini hi-fi system with dvd and 3 cd changer
Hide thumbs Also See for FW-D1:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
A AM Loop Antenna
Connection
Connect the supplied loop antenna to the
AM ANTENNA terminal. Place the AM loop
antenna far away from the system and
adjust its position for the best reception.
B FM Wire Antenna
Connection
Connect the supplied FM wire antenna to
the FM ANTENNA 75 Ω terminal. Adjust
the position of the FM antenna for the best
reception.
Outdoor Antenna
For better FM stereo reception connect an
outdoor FM antenna to the FM ANTENNA
75 Ω terminal using a 75 Ω coaxial wire.
C Speakers Connection
• Connect the right speaker to Front
terminal R, with the coloured wire to +
and the black wire to -.
• Connect the left speaker to Front
terminal L, with the coloured wire to +
and the black wire to -.
• Clip the stripped portion of the speaker
wire as shown.
12 mm
unlock
lock
pg 001-41/D5-D1/21-Eng new
9
CAUTION:
F Subwoofer Out Connection
– For optimal sound performance, it is
Connect the optional active subwoofer to
recommended to use the supplied
the SUBWOOFER OUT terminal. The
speakers.
subwoofer reproduces just the low bass
– Do not connect more than one speaker
sound effect (e.g. explosions, the rumble of
to any one pair of + / - speaker
spaceships, etc.). Be sure to follow the
terminals.
instructions supplied with the subwoofer.
– Do not connect speakers with
impedance lower than the speakers
G Wireless Surround Out
supplied. Please refer to the
SPECIFICATIONS section of this manual.
D Centre Speaker Connection
You may connect the transmitter of the
(for model FW-D5 only)
wireless rear speakers (not supplied) to the
SURROUND OUT terminal.
Connect the black (non-marked) wires to
the black CENTER terminal and the blue
Note:
(marked wires) to the blue CENTER
– Availability of a wireless transmitter and
terminal.
its peripherals are subjected to the
approval of local authorities. Please
E Rear Surround Speakers'
check with the respective local safety or
approving authority.
Connection
(for model FW-D5
only)
Connect the black (non-marked) wires to
the black REAR SURROUND terminals and
the coloured (marked) wires to the grey
REAR SURROUND terminals.
H Line Out Connection
ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder's ANALOGUE IN terminals. This
allows you to record in an analogue format.
You can also install additional optional
front active speakers away from the system
(e.g. in another room) to reduce the
Connection
(for model FW-D5
inconvenience of running long speaker
wires across rooms. You can place as many
only)
remote speakers as you like provided they
operate at the same radio frequency.
Connect the wireless radio frequency
transmitter to the LINE OUT terminals.
Place the active speakers at your preferred
location. Be sure to follow the instructions
supplied with the active speakers.
I Connecting other
equipment to your system
You can connect the audio left and right
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to the
AUX/CDR IN terminals at the rear of the
system.
6/8/01, 11:32 AM
PREPARATION
(wireless
9
3139 115 20054

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fw-d5

Table of Contents