What’s in the box Remote control Composite video cable (yellow) Connect Install remote control batteries Connect speakers Speaker (Right) HIGH CH MP3 link cable D Note • Ensure that the colors of the speaker Speaker (Left) Hold down the socket fl ap. Insert the stripped part of the wire com- pletely.
Connect Connect TV HIGH CH Connect power 110- 127V HIGH CH HIGH CH Connect the supplied composite video cable to: • the VIDEO socket on this unit. • the video input socket on the TV. C Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
Page 4
Setup Set the clock In standby mode, press and hold OSD/ DISPLAY on the remote control. » The hour digits are displayed and begin to blink. Press VOL +/- on the remote control to set the hours. Press OSD/DISPLAY. » The minute digits are displayed and begin to blink.