Advertisement
Quick Links
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
PRODUCT NAME: Saratoga Extension Dining Table
ITEM NUMBER: SL074
DIMENSIONS OF ITEM ASSEMBLED: 30"H x 84"W x 36"D
PRODUCTS ARE NOT INTENDED
MADE IN CHINA
FOR COMMERCIAL USE.
UPDATED: 12/9/2016
Page 1 of 4
Advertisement
Related Manuals for Ballard Designs Saratoga SL074
Summary of Contents for Ballard Designs Saratoga SL074
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Saratoga Extension Dining Table ITEM NUMBER: SL074 DIMENSIONS OF ITEM ASSEMBLED: 30”H x 84”W x 36”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 12/9/2016 Page 1 of 4...
- Page 2 NOTE: Assemble the Table in desired location for use. Box 1 Box 2 Hardware located F- 2 PCS F- 2 PCS here (A-D) TOOLS NEEDED: NOTE: When unpacking, lay the parts on a padded -Requires a screwdriver. surface such as the packaging provided. Be sure to -Two person assembly required.
- Page 3 NOTE: Assemble the Table in desired location for use. STEP 1: Lay the Table Top (E) upside down on a smooth clean surface, such as the packaging provided. Using a Phillips head screwdriver, remove the screws and protective wood from the Table sides.
- Page 4 NOTE: Assemble the Table in desired location for use. STEP 3: Turn the Table upright. If the Table is uneven, adjust the Levelers located on the bottom of the Legs (F). Carefully elevate one side of the Table and twist the Levelers clockwise and counterclockwise until the Table sits evenly.