Summary of Contents for Ballard Designs Andrews SL041
Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Andrews 60” Pedestal Dining Table ITEM NUMBER: SL041 DIMENSIONS OF ITEM ASSEMBLED: 30”H x 60”Diam. PRODUCTS ARE NOT INTENDED MADE IN INDONESIA FOR COMMERCIAL USE. UPDATED: 12/15/2015 Page 1 of 4...
Page 2
Ltr. Qty. Hardware Included TOOLS NEEDED: -Assembly requires 2 or Hexagonal Bolts more people. NOTE: When unpacking, lay Lock Washers the parts on a padded surface such as the packaging provided. Flat Washers Be sure to locate all hardware before throwing away any Wrench packaging.
Page 3
STEP 1: Lay the Table Top (E) upside down on a smooth, clean surface such as the packaging provided. Remove the pre-attached Bridge by unscrewing the Bolts, Lock Washers, and Flat Washers with the Wrench (D). Note: DO NOT discard Bolts and Washers. Keep for later use in Step 3. Bridge STEP 2: Align the four center holes on the Bridge with the Base (F).
Page 4
STEP 3: Carefully flip the Base (F) over and align the four outer holes on the Bridge with the Holes on the Table Top (E). Secure into place using the Bolts, Lock Washers,and Washers collected in Step 1. Tighten using the Wrench (D). Carefully flip the Table upright. Note: Make sure all Bolts are fully tightened before turning the Table upright.