Download Print this page

Troubleshooting - Veris Quad 2800 Soil EC Mapping System Operating Instructions Manual

Advertisement

OM17-Quad2800
Section 5

Troubleshooting

EC data seem odd—jumpy, negatives, map doesn't match known or expected soil types
Perform Maintenance and Service Procedures 1-3.
No GPS or DGPS on display
Perform Maintenance and Service Procedure 5
DataLogger locks up
-SD card not installed or not formatted. See Procedure #6 to format card.
EC Surveyor or DataLogger doesn't power up (power LED not lit)
-Check barrel fuse in power plug (cigarette lighter)
-Check power to vehicle power port
Data status (green LED) light not lit
-check GPS status: must have GPS, DGPS, or RTK
-check EC status: EC values must be positive
-Unit must be moving to send data out port
Disk spring tines breaking:
-reduce ground speed
5-1

Advertisement

loading