Royalcraft SAN REMO SANGAZ2 Assembly And Operating Instructions Manual

Pergola sliding gazebo

Table of Contents

Need help?

Do you have a question about the SAN REMO SANGAZ2 and is the answer not in the manual?

Page 2 1. In the event that your gazebo needs replacement parts, repairs or you require assistance with regards to assembly; please contact our customer sales team by email info@royalcraft.co.uk 2. For cleaning: Use a mild domestic soap or soft detergent and wash with warm water using a sponge or microfibre fabric.
Page 4 STEP ONE: CONNECT 2 X PART B WITH THE MIDDLE CONNTECTOR PART C USING H1 BOLTS STEP TWO: BOLTS NEEDED: H1 2A. CONNECT PART F WITH A1 (A2). 2B. CONNECT YOUR JOINED 2 x PART B TO YOUR A1 (A2) LEG.
Page 5 STEP THREE: BOLTS NEEDED: H3 & H2 3A. CONNECT PART G TO PART B WITH PART I INBETWEEN. 3B. CONNECT PART N TO B. 3C. CONNECT PART D TO PARTS G AND A1 (A2)
Page 6 Please ensure you remove the canopy and curtains during high winds and adverse weather conditions. Royalcraft recommends using Fabsil to protect your Gazebo roof canopies & curtains. It can also be used on cushions & parasols or any material that you leave outside in your garden.