Table of Contents
Advertisement
User instructions
Troubleshooting
In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below .
If the problem persists, contact the retailer if the machine is still under guarantee .
Problem
No Power
No Sound CD/AUX/RADIO
No Sound from AUX input
Sound is distorted
Sound is distorted from AUX
input
Unable to Play
Static Sound
Unit switches off after 20
minutes of inactivity
Disposal information
WEEE marking "Information for the consumer"
Disposal of your old product Your product is
designed and manufactured with high quality
materials and components, which can be
recycled and reused . When this crossed out wheeled bin
symbol is attached to a product it means the product is
covered by the European Directive 2002/96/EC . Please
make yourself aware of the local collection system for
electrical and electronic products . Please act according
to your local rules and do not dispose of your old
products with your normal household waste . The correct
disposal of your old product will help prevent potential
negative consequences for the environment and human
health .
Reason(s)
Power cable not connected to wall
socket
Power socket is not switched on
Volume is too low
AUX source volume is too low
Volume is too high
AUX source volume is too high
No disc in the tray
Disc not loaded properly
Disc is dirty
Poor reception
Auto standby mode in operation
Solution(s)
Make sure the plug is connected
Switch the power on
Increase the volume
Increase the output volume of the AUX
source .
Reduce the volume
Reduce the output volume of the AUX
source .
Insert a compatible disc
Check the disc loaded
Clean the disc
Re-locate the antenna (FM) or relocate
the unit (MW)
This unit is designed to enter STANDBY
mode automatically after 20 MINUTES
of inactivity . Press the STANDBY button
to wake the unit .
Page 7
Advertisement
Table of Contents
