Kingfisher MCS2200 Instructions Manual page 21

3. Fill suitable lubricant into the tank using an oil funnel fitted with a filter to avoid debris entering the tank.
We recommend using environmentally friendly chain oil specially intended to be used with this product.
NOTE: In summer use SAE #30; in winter, or if the trees have excessive sap,
use SAE #10.
4. Don't fill the oil lower than the "MIN" mark on the oil level window (21), but also do not overfill and leave
approximately 5 mm of space between the top of the oil and the inside edge of the tank to allow for
expansion (Fig. 10).
21
NOTE: Towards the end of the season, it is advisable to put only as much
lubricant in the tank as you need for each cut, so that it is completely used up
before you store the product.
5. Check the oil level window (21) prior to start-up and regularly during operation. Refill oil when the oil
level is close to the bottom of the oil level window (21) (Fig. 10).
6. Wipe up spilled lubricant with a soft cloth and refit the oil tank cap (20).
NOTE: Always dispose of lubricant, used oil and objects contaminated with
them in accordance with local regulations.
5063022106193_MNL_IN_V04.indd 21 5063022106193_MNL_IN_V04.indd 21
20
Fig. 9
Fig. 10
21
5 mm
03-04-2023 11:25:56 03-04-2023 11:25:56