Download
Share
Print this page
Kingfisher FPCSP41-3 Manual
  1. Manuals
  2. Brands
  3. Kingfisher Manuals
  4. Chainsaw
  5. FPCSP41-3
  6. Manual
Kingfisher FPCSP41-3 Manual

Kingfisher FPCSP41-3 Manual

Hide thumbs

Advertisement

Quick Links

Petrol Chain Saw
41 cm
3
FPCSP41-3
EAN: 5059340255828
BX220IM
WARNING: Read the instructions before using the product!
MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 1
3/2/22 11:35 AM

Advertisement

loading
Need help?

Need help?

Do you have a question about the FPCSP41-3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kingfisher FPCSP41-3

Summary of Contents for Kingfisher FPCSP41-3

  • Page 1 Petrol Chain Saw 41 cm FPCSP41-3 EAN: 5059340255828 BX220IM WARNING: Read the instructions before using the product! MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 1 3/2/22 11:35 AM...

  • Page 2: Table Of Contents

    Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. started... Getting Safety information Your product Before you start detail... more Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Technical specifications...
  • Page 3 FPCSP41-3 Technical and legal information Safety warnings Petrol powered chain saw safety warnings IMPORTANT Read carefully before use. Keep for future reference. WARNING! Your safety and the safety of others is very important. Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining this product.
  • Page 4 Technical and legal information FPCSP41-3 Safety warnings 4. Keep your work area free from pets, animals, children and bystanders. 5. Follow instructions for lubricating, chain tensioning and changing accessories. Improperly tensioned or lubricated chain may either break or increase the chance for kickback.
  • Page 5 FPCSP41-3 Technical and legal information 16. Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the falling tree. 17. All product servicing & maintenance, other than the items listed in the user manual, safety and maintenance instructions, should be performed by an authorised service centre.
  • Page 6 Technical and legal information FPCSP41-3 Safety warnings Fuel handling 1. Before refuelling, stop the engine, disconnect the spark plug connector and let the product cool. Fuel and fuel vapours are highly flammable. Take care when handling fuel. Never smoke when you are refuelling the product.
  • Page 7 FPCSP41-3 Technical and legal information 10. Fuel vapour pressure may build up inside the fuel tank depending on the fuel used, weather conditions and the tank venting system. To reduce the risk of burns and other personal injuries, remove the fuel cap carefully to allow any pressure build up to release slowly.

  • Page 8: Getting Started

    Technical and legal information FPCSP41-3 Safety warnings 23. If the fuel tank is drained, this should be done outdoors. Getting started 1. Do not operate the product indoors, it produces poisonous exhaust fumes whilst the engine is running and may be colourless and odourless.
  • Page 9 FPCSP41-3 Technical and legal information Operation 1. When sawing, ensure the product does not touch any foreign materials such as rocks, fences, nails etc. Such objects may be flung out and could result in damage to the product or serious personal injury or even death.
  • Page 10 Technical and legal information FPCSP41-3 Safety warnings 12. Do not operate a product that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw chain stops moving when the throttle trigger is released. 13. Do not operate this product in a tree unless you have been specifically trained to do so.
  • Page 11 FPCSP41-3 Technical and legal information Transport and storage 1. Do ensure the engine is off and engage the chain brake before transporting the product. 2. Do carry the product with the engine stopped, the guide bar and saw chain to the rear, and the exhaust away from your body.
  • Page 12 Technical and legal information FPCSP41-3 Safety warnings Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.
  • Page 13 FPCSP41-3 Technical and legal information Vibration and noise reduction To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes as well as wear personal protective equipment. Take the following points into account to minimize the vibration and noise exposure risks: 1.
  • Page 14 Technical and legal information FPCSP41-3 Safety warnings The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration syndrome injuries to users of product’s with vibration emission. The directive requires manufacturers and suppliers to provide indicative vibration test results to...
  • Page 15 FPCSP41-3 Technical and legal information Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: 1.
  • Page 16 Technical and legal information FPCSP41-3 Symbols Kilowatt cm³ Cubic centimetre /min or min Per minute Millimetre Kilogram g/kWh Gram per kilowatt per hour Millilitre Litre dB(A) Decibel (A-rated) m/s² Metres per seconds squared yyWxx Manufacturing date code; year of manufacturing (20yy) and week of manufacturing (Wxx) Lock / to tighten or secure.
  • Page 17 FPCSP41-3 Technical and legal information This product produces noxious exhaust fumes. If the product is used improperly, these fumes can lead to poisoning, a loss of consciousness or death! Noxious exhaust fumes; do not operate or start the product in...
  • Page 18 The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. UK Conformity Assessed. Rating label explanation Petrol chain saw: FPCSP41-3 = MODEL NUMBER FP = Brand name CS = Chain saw P = Petrol...

  • Page 19: Your Product

    FPCSP41-3 Your product Your product 11a 11b 10 11 2 3 4 15 15a 22 21 20 18 18a 27 26 25 24 MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 19 3/2/22 11:35 AM...
  • Page 20 Your product FPCSP41-3 Your product 1. Rear handle 11. Guide bar 21. Drive sprocket* 2. Throttle interlock a. Lubrication hole 22. Chain oil flow 3. Throttle trigger b. Sprocket wheel adjustment screw* 4. Primer c. Tension hole* 23. Ignition switch (on/ 5.

  • Page 21: Before You Start

    FPCSP41-3 Before you start Unpacking 1. Unpack all parts and lay them on a flat, stable surface. 2. Remove all packing materials and shipping devices, if applicable. 3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
  • Page 22 Before you start FPCSP41-3 Assembly Chain and guide bar Assemble the guide bar (11) and saw chain (10) before operation. Use only the guide bar (11) and saw chain (10) according to the technical parameter of this product. WARNING! Always use a saw chain designed as “low-kickback” or a...
  • Page 23 FPCSP41-3 Before you start WARNING! The direction of the saw chain ‘cutters’ must be as indicated by the symbol and arrow on the guide bar (11)! 5. Place the saw chain (10) over the drive sprocket (21) (behind the clutch (20)) and fit around the guide bar (11).
  • Page 24 Before you start FPCSP41-3 Assembly NOTE: Fix the nuts finger tight only at this stage. The chain tension cannot be adjusted with the retaining nut (12) tightened - they must be loosened first. NOTE: The saw chain (10) has not yet been tensioned. Tension the chain as described under “Saw chain tensioning”.
  • Page 25 FPCSP41-3 Before you start Chain ‘tie straps’ Fig. 8 Fig. 9 3. Pull the saw chain (10) along the top of the guide bar (11) by hand from one end to the other, several times. The chain should feel tight but still move freely.
  • Page 26 Before you start FPCSP41-3 Assembly WARNING! Fuel and oil are highly inflammable! Fumes will explode if lit! Ensure that there are no naked flames around the product! Do not smoke while filling fuel and oil! 1. Place the product on a stable, level surface. We recommend laying a non- flammable sheet under the product.
  • Page 27 FPCSP41-3 Before you start 8. Tighten the two caps first. By tilting the tank, the oil falls into the petrol. Shake the fuel mixture thoroughly before filling the fuel tank. NOTE: Never mix fuel and oil directly in the tank of the product. Use a fuel mixing bottle (30) that helps to ensure the correct mixing ratio.
  • Page 28 Before you start FPCSP41-3 Assembly Chain lubrication WARNING! The product is not filled with chain oil. It is essential to fill the product with chain oil before using it! Never operate the product without chain oil as this will result in extensive damage to the product!
  • Page 29 FPCSP41-3 Before you start NOTE: Always dispose of lubricant, used oil and objects contaminated with them in accordance with local regulations. Checking NOTE: Perform the following test before operating your product. This product is equipped with an automatic oiling system! The oiling...
  • Page 30 Quick start FPCSP41-3 Operating controls Spark plug Front hand connector guard Air filter cover Choke lever Primer Throttle interlock Throttle trigger Recoil starter Fuel tank handle Chain oil Ignition switch tank cap (On/off) MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 30 3/2/22 11:35 AM...
  • Page 31 FPCSP41-3 Quick start Set up 40:1 Assemble Adjust Add fuel / oil Add oil mixture Cold start CLOSE Engage chain Set ignition Pull out choke Press primer Pull recoil brake switch to “I” lever (5) fully (4) x6 until the...
  • Page 32 Quick start FPCSP41-3 Warm start CLOSE OPEN Engage chain Set ignition Pull out choke Press the Pull recoil brake switch to “I” lever (5) fully choke lever starter handle (5) in until engine start Press throttle Disengage the Operate interlock (2)
  • Page 33 FPCSP41-3 Quick start Storage Empty fuel tank Empty chain oil Clean and Store tank maintain WARNING! This quick start provides only a short overview of how to start and stop the product! For safe use it is essential to read the entire instruction manual before first use! MNL_Petrol Chainsaw_FPCSP41-3_GB_V02_220301.indd 33...
  • Page 34 Product functions FPCSP41-3 Intended use This petrol chain saw FPCSP41-3 is designated with a power output of 1.4 kW. The product is intended for cutting logs and limbs with a thickness of max. 350 mm. It must not be used for cutting other materials, such as plastic, stone, metal, wood that contains foreign objects, or materials that are harmful to health.

  • Page 35: Product Functions

    FPCSP41-3 Product functions CLOSE OPEN Fig. 21a Fig. 21b NOTE: It is easier to start the engine by setting the throttle at fast tickover. When the throttle fast tickover is cancelled, the engine runs at idle speed. Chain brake The chain brake is a safety mechanism activated by the front hand guard (chain brake lever) (9).
  • Page 36 Product functions FPCSP41-3 Chain brake 1. Make sure the chain brake is disengaged. Disengage the chain brake by pulling the front hand guard (9) back towards the front handle (8). 2. Place the product on any suitable flat surface, make sure the saw chain (10) is not touching the surface or other objects.
  • Page 37 FPCSP41-3 Product functions WARNING! If the saw chain shows any signs of moving, stop the engine immediately! Wait for all moving parts to stop! Contact an authorised service centre or a similarly qualified person to re-adjust idling speed! Starting / Stopping...
  • Page 38 Product functions FPCSP41-3 Starting / Stopping NOTE: When the choke is at OPEN position and the engine speed gets inconsistent. Then pull the choke slightly out to middle position to allow additional time for warming up. After warm-up push the choke back to OPEN position.
  • Page 39 FPCSP41-3 Product functions 9. Once the engine is running smoothly, carefully pull the front hand guard (9) back toward the front handle (8) to disengage the chain brake (Fig. 25, step 10. Hold the product with the left hand on front handle (8) and the right hand on rear handle (1).

  • Page 40: Operation

    Operation FPCSP41-3 General operation 1. Check the product, as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. 2. Double check that accessories and the guide bar/saw chain are properly fixed.
  • Page 41 FPCSP41-3 Operation 5. Ensure the saw chain (10) is running at full speed before it makes contact with the wood. Use the spiked bumper to secure the product onto the wood before starting to cut and use it as a leverage point while cutting (Fig.
  • Page 42 Operation FPCSP41-3 Basic operating / cutting procedure Fig. 30 Fig. 31 Fig. 32 1. Pinching of the saw chain (10) along the bottom of the guide bar (11) may pull the product forward away from the operator (Fig. 33). 2. Pinching of the saw chain (10) along the top of the guide bar (11) may push the guide bar rapidly back toward the operator (Fig.
  • Page 43 FPCSP41-3 Operation 8. Apply the metal gripping teeth for leverage the work piece. 9. Ensure correct chain tension. 10. Do only cut with the engine at high speeds. 11. Do not let the nose of the guide bar contact a log, branch, or any other obstruction which could be hit while you are operating the product.
  • Page 44 Operation FPCSP41-3 Felling a tree Felling back cut 1. Make the felling back cut (Fig. 36, A) at least 50 mm higher than the horizontal notching cut (Fig. 36). Keep the felling back cut parallel to the horizontal notching cut. Make the felling back cut so enough wood is left to act as a hinge.
  • Page 45 FPCSP41-3 Operation Cutting spring poles A spring pole is any log, branch, rooted stump, or sapling which is bent under tension by other wood so that it springs back if the wood holding it is cut or removed (Fig. 38).
  • Page 46 Operation FPCSP41-3 Bucking a log Fig. 41 Fig. 42 5. Support small logs on a sawing stand or another log while bucking (Fig. 42). 6. If the wood diameter is large enough for you to insert a soft bucking wedge without touching the chain, you should use the wedge to hold the cut open to prevent pinching (Fig.

  • Page 47: Care And Maintenance

    FPCSP41-3 Care and maintenance The golden rules for care WARNING! Always switch the product off , disconnect the spark plug connector (7) and let the product cool down before performing inspection, maintenance and cleaning work! Maintain this product regularly and carefully! If the product is improperly maintained, it may fail at its intended task, which may produce fatal consequences.
  • Page 48 Care and maintenance FPCSP41-3 General Cleaning 1. Clean the sprocket wheel (11b). 2. Using a disposable lube gun, insert the needle nose into the lubrication hole (11a) and inject grease until it appears at the outside edge of the sprocket wheel (11b) (Fig. 45).
  • Page 49 FPCSP41-3 Care and maintenance 5. Check the guide bar ‘rail’ for wear: Hold a ruler (straight edge) against the side of the guide bar and ‘cutter side plates’. If there is a gap between the ruler and guide bar the guide bar ‘rail’ is normal.
  • Page 50 Care and maintenance FPCSP41-3 General Cleaning 4. Use the chain file (not delivered), whose diameter is 1.1 times the cutting tooth depth. Make sure 20% of the file diameter is above the cutter’s top plate. NOTE: A file guide is available from most reputable tool merchants and is the easiest way to hold the file at the correct position.
  • Page 51 FPCSP41-3 Care and maintenance 1. Loosen the fixing screw (6) (Fig. 52, step 1) and remove the air filter cover (6a) to reach the air filter (6b). 2. Remove the air filter (6b) from the supporting bolt, and keep the rubber sealing (6c) in place to avoid loss (Fig.
  • Page 52 Care and maintenance FPCSP41-3 General Cleaning 8. Replace with a new spark plug if either the electrode or the insulation is damaged. 9. When replacing the spark plug (7a), first screw it in hand tight and then lightly tighten it with the multi-tool (31).
  • Page 53 FPCSP41-3 Care and maintenance 1. Release throttle and allow engine to idle. 2. Adjust the idle speed with the idle adjustment screw T which is identified with “T” mark (Fig. 55). 3. Turn the idle adjustment screw clockwise to increase engine idle speed.
  • Page 54 Care and maintenance FPCSP41-3 Maintenance Part To do Before/ 10 hours 25 hours 50 hours after / half hours / each use year once a year Cylinder clean Spark plug check clean replace Air filter check clean replace whenever necessary...
  • Page 55 FPCSP41-3 Care and maintenance Repair This product does not contain any parts that can be repaired by the consumer. Contact an authorised service centre or a similarly qualified person to have it checked and repaired. Storage NOTE: Good storage conditions are important for keeping your product trouble free.
  • Page 56 Troubleshooting FPCSP41-3 Troubleshooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions!
  • Page 57 FPCSP41-3 Troubleshooting Problem Possible cause Solution 4. Engine 4.1. Spark plug is defective 4.1. Install new, correctly operates gapped plug erratically 4.2. Spark plug gap is 4.2. Set gap between incorrect electrodes at 0.5 mm 4.3. Air filter is dirty 4.3.
  • Page 58 Recycling and disposal FPCSP41-3 Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Old products are potentially recyclable and do not, therefore, belong in your household rubbish.
  • Page 59 FPCSP41-3 Guarantee Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.
  • Page 60 Technical specifications FPCSP41-3 Technical specifications General > Dimensions : approx. 710 x 280 x 300 mm > Machine mass (without guide bar and chain, empty tanks and in normal operating configuration) : approx. 4.5 kg > Machine mass (with guide bar and...
  • Page 61 FPCSP41-3 Technical specifications > Chain pitch : 9,525 mm (0,375”) > Chain gauge : 1.27 mm (0,050”) > Drive sprocket : 6 teeth x 9.525 mm > Max. chain speed : 21 m/s Sound level > Sound pressure level L : 98.8 dB(A)
  • Page 62 Nazwa i adres producenta lub jego upoważnionego przedstawiciela: Denumirea și adresa producătorului sau a reprezentantului său autorizat: Nombre y dirección del fabricante o de su representante autorizado: Nome e endereço do fabricante ou do respetivo mandatário: Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands This declaration of conformity is issued under the sole responsibility of the manufacturer.
  • Page 63 FPCSP41-3 EC declaration of conformity 2006/42/EC as amended Machinery Directive 2014/30/EU as amended Directive Electromagnetic compatibility 2000/14/EC as amended Outdoor Noise Directive (EU)2016/1628 Regulation Gaseous and Particulate Pollutant Emission Limits 2011/65/EU as amended Directive Restriction of the use of certain hazardous substances in electrical and...
  • Page 64 Authorised signatory and technical file holder/signataire et responsable de la documentation technique authorisé/ podmiot uprawniony do wystawienia i adres prezechowywania dokumentacji technicznej/semnatar autorizat și deținător al dosarului tehnic/firmante autorizado y titular del expediente tecnico/ signatário autorizado e detentor da ficha técnica Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands David Awe Group Quality &...
  • Page 65 Pour consulter les manuels d’instructions en ligne, www.bricodepot.fr rendez-vous sur le site www.kingfisher.com/products www.castorama.pl Aby zapozna si z instrukcj obs ugi online, odwied stron www.kingfisher.com/products www.bricodepot.es Para consultar los manuales de instrucciones en línea, visite www.kingfisher.com/products www.bricodepot.pt...

This manual is also suitable for:

5059340255828