Dell E1715S Disassembly page 8

2. Product material information
The following substances, preparations, or components should be disposed of or recovered
separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC.
Capacitors / condensers (containing
PCB/PCT)
Mercury containing components
Batteries
Printed circuit boards (with a surface
greater than 10 square cm)
Component contain toner, ink and liquids
Plastic containing BFR
Component and waste contain asbestos
CRT
Component contain CFC, HCFC, HFC
and HC
Gas discharge lamps
LCD display > 100 cm2
External electric cable
Component contain refractory ceramic
fibers
Component contain radio-active
substances
Electrolyte capacitors (height
> 25mm, diameter > 25mm)
3. Tools Required
List the type and size of the tools that would typically can be used to disassemble the product to a point
where components and materials requiring selective treatment can be removed.
Tool Description:
‐ Phillip head Screwdriver
‐ Hex Screwdriver
‐ Penknife
‐ Soldering iron and absorber
No used
No used
No used
Product has printed circuit boards (with a
surface greater than 10 square cm)
No used
No used
No used
No used
No used
No used
Product has an LCD greater than 100 cm2
Product has external cables
No used
No used
Product has electrolyte capacitors
(height > 25mm, diameter > 25mm)
E1715S 8