Related Manuals for Avalue Technology ECM-SKLU-B1
Summary of Contents for Avalue Technology ECM-SKLU-B1
- Page 1 ECM-SKLU-B1 Intel® 6th Generation ULT Processor 3.5”Micro Module User’s Manual Ed –15 November 2021 Part No. E2047393802R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
- Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 ECM-SKLU-B1 User’s Manual...
-
Page 5: Table Of Contents
PC Buzzer connector (JBZ1) ..................... 28 2.3.21 AUDIO connector (JAUDIO1) ....................28 Signal Description – Audio connector (JAUDIO1) ..............28 2.3.21.1 AUX-032 User’s Guide .................... 29 2.4.1 Jumper and Connector Layout ....................... 29 2.4.2 Jumper and Connector List ......................29 ECM-SKLU-B1 User’s Manual... - Page 6 3.6.2.12 Network Stack Configuration ....................50 3.6.2.13 CSM Configuration ........................ 51 3.6.2.14 NVMe Configuration ......................51 3.6.2.15 USB Configuration ......................... 52 3.6.3 Chipset............................53 3.6.3.1 System Agent (SA) Configuration ..................53 3.6.3.1.1 Graphics Configuration ......................54 6 ECM-SKLU-B1 User’s Manual...
- Page 7 Install ME Driver ...................... 72 Install VGA Driver ....................73 Install Audio Driver (For Realtek ALC892) .............. 75 Install Ethernet Driver ....................76 Install Serial IO Driver ..................... 78 Install IRST Driver ....................80 5. Mechanical Drawing ....................82 ECM-SKLU-B1 User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x 3.5” ECM-SKLU-B1 Micro Module 1 x AUX-032 daughter board ... -
Page 9: Document Amendment History
User’s Manual 1.3 Document Amendment History Revision Date Comment November 2021 Avalue Initial Release ECM-SKLU-B1 User’s Manual... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to set up ECM-SKLU-B1 or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
Dual channel 18/24-bit LVDS (via 7511B) Audio AC97 Codec Realtek ALC888S-VD2-GR Audio Amp Line in ,Line-Out, Mic in Ethernet 1 x Intel I211AT GbE controller (Co-lay I210AT) LAN Chip 1 x Intel I219LM Gigabit Ethernet PHY ECM-SKLU-B1 User’s Manual 11... - Page 12 0% ~ 90% relative humidity, non-condensing Humidity Size (L x W) 5.7" x 4" (146mm x 101mm) Weight 0.44 lbs (0.2 Kg) Win10/8.1/7/Linux OS Support (listed in accordance with Intel document) Note: Specifications are subject to change without notice. 12 ECM-SKLU-B1 User’s Manual...
-
Page 13: Architecture Overview-Block Diagram
User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of ECM-SKLU-B1. ECM-SKLU-B1 User’s Manual 13... -
Page 14: Hardware Configuration
ECM-SKLU-B1 User’s Manual 2. Hardware Configuration 14 ECM-SKLU-B1 User’s Manual... -
Page 15: Product Overview
User’s Manual 2.1 Product Overview ECM-SKLU-B1 User’s Manual 15... -
Page 16: Jumper And Connector List
LCD inverter connector Matching Connector: JST PHR-5 CPU fan connector 4 x 1 wafer, pitch 2.54mm CPU_FAN1 System fan connector 4 x 1 wafer, pitch 2.54mm SYS_FAN1 COM1 Serial Port 1 connector D-sub 9 pin, male 16 ECM-SKLU-B1 User’s Manual... - Page 17 EC Debug connector 3 x 1 header, pitch 2.00mm SATA_PWR1 SATA Power connector 2 x 1 wafer, pitch 2.00mm Serial ATA connector SATA1 HDMI connector HDMI1 DDR4 SODIMM socket SO_DIMM1 MINI_PCIE1 Mini-PCIe_connector USIM1 SIM card slot ECM-SKLU-B1 User’s Manual 17...
-
Page 18: Setting Jumpers & Connectors
ECM-SKLU-B1 User’s Manual 2.3 Setting Jumpers & Connectors 2.3.1 Serial port 1 pin9 signal select (JRI1) Ring* +12V * Default 2.3.2 Clear CMOS (JBAT1) Normal* Clear CMOS * Default 18 ECM-SKLU-B1 User’s Manual... -
Page 19: Lcd Backlight Brightness Adjustment (Jbkl_Sel1)
User’s Manual 2.3.3 LCD backlight brightness adjustment (JBKL_SEL1) PWM Mode* DC Mode * Default 2.3.4 AT/ATX Input power select (JAT1) * Default ECM-SKLU-B1 User’s Manual 19... -
Page 20: Lcd Inverter Connector (Jbkl1)
ECM-SKLU-B1 User’s Manual 2.3.5 LCD inverter connector (JBKL1) Signal +12V BKLEN VBRIGHT 2.3.6 CPU fan connector (CPU_FAN1) Signal PWM_FAN0 EC_TACH0 +12V 20 ECM-SKLU-B1 User’s Manual... -
Page 21: System Fan Connector (Sys_Fan1)
User’s Manual 2.3.7 System fan connector (SYS_FAN1) Signal +12V EC_TACH1 PWM_FAN1 2.3.8 Serial port 2/3/4/5/6 connector (JCOM2/3/4/5/6) JCOM2 JCOM5 JCOM3 JCOM6 JCOM4 Signal PIN PIN Signal COM_DCD# COM_RXD COM_TXD COM_DTR# COM_DSR# COM_RTS# COM_CTS# COM_RI# ECM-SKLU-B1 User’s Manual 21... -
Page 22: Serial Port 2 In Rs-422/485 Mode (J422_485)
2.3.9 Serial port 2 in RS-422/485 mode (J422_485) Signal PIN PIN Signal 485-422_TXDN 485-422_TXDP 422_RXDP 422_RXDN 2.3.10 General purpose I/O connector (JDIO1) Signal PIN PIN Signal DIO_GP20 DIO_GP10 DIO_GP21 DIO_GP11 DIO_GP22 DIO_GP12 DIO_GP23 DIO_GP13 SMB_SCL_S0 SMB_SDA_S0 22 ECM-SKLU-B1 User’s Manual... -
Page 23: Sata Power Connector (Sata_Pwr1)
User’s Manual 2.3.11 SATA Power connector (SATA_PWR1) Signal 2.3.12 Power connector (PWR1) Signal Signal +26V +26V ECM-SKLU-B1 User’s Manual 23... -
Page 24: Lvds Connector (Jlvds1)
10 LVDS_DATA0_P LVDS_DATA1_N 11 12 LVDS_DATA0_N LVDS_DATA3_P 15 16 LVDS_DATA2_P LVDS_DATA3_N 17 18 LVDS_DATA2_N LVDS_DATA5_P 21 22 LVDS_DATA4_P LVDS_DATA5_N 23 24 LVDS_DATA4_N LVDS_DATA7_P 27 28 LVDS_DATA6_P LVDS_DATA7_N 29 30 LVDS_DATA6_N LVDS_CLK2_P LVDS_CLK1_P LVDS_CLK2_N LVDS_CLK1_N +12V +12V 24 ECM-SKLU-B1 User’s Manual... -
Page 25: Usb2.0 Connector (Jusb56)
User’s Manual 2.3.14 USB2.0 connector (JUSB56) Signal PIN PIN Signal +5VSB USB_R_DN5 USB_R_DP5 USB_R_DP6 USB_R_DN6 +5VSB 2.3.15 SPI connector (JSPI1) Signal PIN PIN Signal +3.3VSB SPI_CS0# SPI_CLK SPI_MISO SPI_MOSI BIOS_HOLD# BIOS_WP# ECM-SKLU-B1 User’s Manual 25... -
Page 26: Ec Debug Connector (Jec_Rom1)
ECM-SKLU-B1 User’s Manual 2.3.16 EC Debug connector (JEC_ROM1) Signal EC_SMDAT_DEBUG EC_SMCLK_DEBUG 2.3.17 Battery connector (BAT1) Signal +RTCBAT 26 ECM-SKLU-B1 User’s Manual... -
Page 27: Lpc Connector (Jlpc1)
User’s Manual 2.3.18 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 RST_TPM# LPC_AD2 LPC_LFRAME# LPC_AD3 CLK2_LPC_DEBUG LPC_SERIRQ 2.3.19 Front Panel connector (JFP1) Signal PIN PIN Signal PWRBTN_TO_EC# PM_SYSRST# FP_PWR_LED+ PWR_LED# HDD_LED# CASE_OPEN# ECM-SKLU-B1 User’s Manual 27... -
Page 28: Pc Buzzer Connector (Jbz1)
HD_AGND HD_AGND LINE1-R-IN LINE1-L-IN MIC1-R-IN MIC1-L-IN FRONT-JD LINE1-JD MIC1-JD HD_AGND 2.3.21.1 Signal Description – Audio connector (JAUDIO1) Signal Signal Description LINE1-JD AUDIO IN (LINE_RIN/LIN)sense pin FRONT-JD AUDIO Out(ROUT/LOUT) sense pin MIC1-JD MIC IN (MIC_RIN/LIN) sense pin 28 ECM-SKLU-B1 User’s Manual... -
Page 29: Aux-032 User's Guide
2.54mm USB connector 5 x 2 header, pitch 2.54mm 2.0mm USB connector 5 x 2 header, pitch 2.0mm 2.0mm USB connector 5 x 2 header, pitch 2.0mm TV / Audio connector 8 x 2 header, pitch 2.54mm ECM-SKLU-B1 User’s Manual 29... -
Page 30: Setting Jumper And Connector
Mic Bais Line out L Line out R SPK L SPK R Line in L Line in R TVGND TVGND COMP 2.0mm USB Connector (JP4) 2.0mm USB Connector (JP5) Signal PIN PIN Signal Signal PIN PIN Signal 30 ECM-SKLU-B1 User’s Manual... -
Page 31: Cooler Installation
User’s Manual 2.5 Cooler installation 1. Please remove release paper. 2. Please follow the below picture to install the cooler and cooler wire. And push down 4 screw of cooler and finish the installation. ECM-SKLU-B1 User’s Manual 31... -
Page 32: Bios Setup
ECM-SKLU-B1 User’s Manual 3.BIOS Setup 32 ECM-SKLU-B1 User’s Manual... -
Page 33: Introduction
If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. ECM-SKLU-B1 User’s Manual 33... -
Page 34: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 34 ECM-SKLU-B1 User’s Manual... -
Page 35: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. ECM-SKLU-B1 User’s Manual 35... -
Page 36: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 36 ECM-SKLU-B1 User’s Manual... -
Page 37: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. ECM-SKLU-B1 User’s Manual 37... -
Page 38: Trusted Computing
3.6.2.1 Trusted Computing Item Options Description Enables or Disables BIOS support for security device. Disable, Security Device Support O.S. will not show Security Device. TCG EFI protocol Enable[Default] and INT1A interface will not be available. 3.6.2.2 APCI Settings 38 ECM-SKLU-B1 User’s Manual... -
Page 39: Amt Configuration
Last state Disabled[Default], 30 sec 40 sec 50 sec Watch Dog Select WatchDog. 1 min 2 min 10 min 30 min Disabled Enabled/Disabled USB Standby Power USB Standby Power Setting Enabled[Default], during S3/S4/S5. 3.6.2.3 AMT Configuration ECM-SKLU-B1 User’s Manual 39... -
Page 40: Pch-Fw Configuration
BIOS Extension. Note: iAMT H/W is always enabled. This Intel AMT Enabled[Default], option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device. Disabled[Default] Un-Configure ME OEMFlag Bit 15: Un-Configure ME without password. Enabled, 3.6.2.4 PCH-FW Configuration 40 ECM-SKLU-B1 User’s Manual... -
Page 41: Firmware Update Configuration
Enable/Disable Me FW Image Re-Flash function. Enabled 3.6.2.5 IT8528 Super IO Configuration You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.5.1~ 3.6.2.5.6 for more information. ECM-SKLU-B1 User’s Manual 41... -
Page 42: Serial Port 1 Configuration
Set Parameters of Serial Port 5 (COME). Serial Port 6 Configuration Set Parameters of Serial Port 6 (COMF). 3.6.2.5.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 42 ECM-SKLU-B1 User’s Manual... -
Page 43: Serial Port 2 Configuration
3.6.2.5.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default] Change the Serial Port as UART 232 422 485 UART 422 RS232/422/485. UART 485 3.6.2.5.3 Serial Port 3 Configuration ECM-SKLU-B1 User’s Manual 43... -
Page 44: Serial Port 4 Configuration
Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.5 Serial Port 5 Configuration 44 ECM-SKLU-B1 User’s Manual... -
Page 45: Serial Port 6 Configuration
User’s Manual Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.6 Serial Port 6 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.6 H/W Monitor ECM-SKLU-B1 User’s Manual 45... -
Page 46: S5 Rtc Wake Settings
Select Fixed Time, system will wake on the Wake system from S5 Fixed Time hr::min::sec specified. Select Dynamic Time, System Dynamic Time will wake on the current time + Increase minute(s). 3.6.2.8 Serial Port Console Redirection 46 ECM-SKLU-B1 User’s Manual... -
Page 47: Legacy Console Redirection Settings
Select a COM port to display COM1[Default], redirection of Legacy OS Legacy Serial Redirection COM1(Pci Bus0, Dev0, Func0) (Disabled) and Legacy OPROM Messages. 3.6.2.9 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. ECM-SKLU-B1 User’s Manual 47... - Page 48 Intel Virtualization Technology additional hardware capabilities provided by Enabled[Default] Vanderpool Technology. Disabled, Turbo Mode Turbo Mode. Enabled[Default] Disabled, CPU C states Enable or disable CPU C states. Enabled[Default] C0/C1 Package C State limit Package C State limit. AUTO[Default] 48 ECM-SKLU-B1 User’s Manual...
-
Page 49: Intel Txt Configuration
3.6.2.11 SATA Configuration Item Options Description Enabled[Default] SATA Controller(s) Enable or disable SATA Device. Disabled, Enabled SATA Test Mode Test Mode Enable/Disable (Loop Back). Disabled[Default], Enabled Enable PCH to aggressively enter link power Aggressive LPM Support Disabled[Default] state. ECM-SKLU-B1 User’s Manual 49... -
Page 50: Network Stack Configuration
Enabled[Default] Port 2 Enable or Disable SATA Port. Disabled, Hard Disk Drive[Default] Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. 3.6.2.12 Network Stack Configuration 50 ECM-SKLU-B1 User’s Manual... -
Page 51: Csm Configuration
User’s Manual Item Options Description Enabled Network Stack Enable/Disable UEFI Network Stack. Disabled[Default] 3.6.2.13 CSM Configuration Item Options Description Enabled CSM Support Enable/Disable CSM Support. Disabled[Default] 3.6.2.14 NVMe Configuration ECM-SKLU-B1 User’s Manual 51... -
Page 52: Usb Configuration
Maximum time the device will take before it properly reports itself to the Host Controller. Auto[Default] ‘Auto’ uses default value: for a Root port it is Device power-up delay Manual 100ms, for a Hub port the delay is taken form Hub descriptor. 52 ECM-SKLU-B1 User’s Manual... -
Page 53: Chipset
User’s Manual 3.6.3 Chipset 3.6.3.1 System Agent (SA) Configuration Item Option Description Enabled[Default] VT-d VT-d capability. Disabled ECM-SKLU-B1 User’s Manual 53... -
Page 54: Graphics Configuration
BR Button Brightness Control Method 1.BIOS 2.Brightness Button 3.Variable Resistor 4.OS Driver. OS Driver LVDS Back Light PWM Select LVDS back light PWM duty. 100%[Default] LVDS Back Light PWM 200[Default] Select LVDS back light PWM Frequency Frequency. 54 ECM-SKLU-B1 User’s Manual... -
Page 55: Memory Configuration
User’s Manual 3.6.3.1.2 Memory Configuration Item Option Description Maximum Value of TOLUD. Dynamic Dynamic[Default] assignment would adjust TOLUD automatically Max TOLUD 1GB/1.25GB/1.5GB/1.75GB based on largest MMIO length of installed /2GB/2.25GB/2.5GB/2.75GB graphic controller. ECM-SKLU-B1 User’s Manual 55... -
Page 56: Pch-Io Configuration
ECM-SKLU-B1 User’s Manual 3.6.3.2 PCH-IO Configuration Item Option Description Disabled PCH LAN Controller Enable or disable onboard NIC. Enabled[Default] 3.6.3.2.1 PCI Express Configuration 56 ECM-SKLU-B1 User’s Manual... - Page 57 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 ECM-SKLU-B1 User’s Manual 57...
- Page 58 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 58 ECM-SKLU-B1 User’s Manual...
- Page 59 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 ECM-SKLU-B1 User’s Manual 59...
- Page 60 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 60 ECM-SKLU-B1 User’s Manual...
-
Page 61: Usb Configuration
SSIC Port 1 Enable/Disable support for SSIC. Disabled, Option to disable Compliance Mode. Default FALSE[Default], XHCI Disable Compliance Mode is FALSE to not disable Compliance Mode. TRUE Set TRUE to disable Compliance Mode. 3.6.3.2.3 HD Audio Configuration ECM-SKLU-B1 User’s Manual 61... -
Page 62: Security
Enabled = HDA will be HD Audio Enabled unconditionally enabled Auto = HDA will be enabled if Auto[Default], present, disabled otherwise. 3.6.4 Security Administrator Password Set setup Administrator Password User Password Set User Password 62 ECM-SKLU-B1 User’s Manual... -
Page 63: Secure Boot Menu
User mode with enrolled Platform Key(PK) 2.CSM Enabled function is disabled. Secure Boot mode selector. ‘Custom’ Mode enables Standard Secure Boot Mode users to change Image Execution policy and manage Custom[Default] Secure Boot Keys. 3.6.4.1.1 Key Management ECM-SKLU-B1 User’s Manual 63... - Page 64 ECM-SKLU-B1 User’s Manual 64 ECM-SKLU-B1 User’s Manual...
- Page 65 User’s Manual ECM-SKLU-B1 User’s Manual 65...
- Page 66 ECM-SKLU-B1 User’s Manual Item Option Description Enabled, Install Factory default Secure Boot Keys Provision Factory Default keys Disabled[Default] when System is in Setup Mode. 66 ECM-SKLU-B1 User’s Manual...
-
Page 67: Boot
Enables or disables boot with Disabled[Default] initialization of a minimal set of devices Fast Boot Enabled required to launch active boot option. Has no effect for BBS boot options. Boot Option #1 Set the system boot order. ECM-SKLU-B1 User’s Manual 67... -
Page 68: Save And Exit
ECM-SKLU-B1 User’s Manual 3.6.6 Save and exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 68 ECM-SKLU-B1 User’s Manual... -
Page 69: Discard Changes And Reset
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. ECM-SKLU-B1 User’s Manual 69... -
Page 70: Drivers Installation
ECM-SKLU-B1 User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. 70 ECM-SKLU-B1 User’s Manual... -
Page 71: Install Chipset Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Install. Step 4. Installing. Step1. Click Next. Step 5. Setup completed. Step 2. Click Accept. ECM-SKLU-B1 User’s Manual 71... -
Page 72: Install Me Driver
Windows 10 operation system. Step 3. Click Next to continue installation. Step 4. Installing. Step1. Click Next to start installation. Step 2. Click Next. Step 5. Click Finish to complete setup. 72 ECM-SKLU-B1 User’s Manual... -
Page 73: Install Vga Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Yes to accept license agreement. Step 5. Click Next. ECM-SKLU-B1 User’s Manual 73... - Page 74 ECM-SKLU-B1 User’s Manual Step 6. Click Finish to complete setup. 74 ECM-SKLU-B1 User’s Manual...
-
Page 75: Install Audio Driver (For Realtek Alc892)
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Finish to complete the setup. Step 1. Click Next to continue setup. Step 2. Installing. ECM-SKLU-B1 User’s Manual 75... -
Page 76: Install Ethernet Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Install. Step 2. Click Next. Step 5. Installing. 76 ECM-SKLU-B1 User’s Manual... - Page 77 User’s Manual Step 6. Click Finish to complete setup. ECM-SKLU-B1 User’s Manual 77...
-
Page 78: Install Serial Io Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 2. Click Next. Step 5. Installing. 78 ECM-SKLU-B1 User’s Manual... - Page 79 User’s Manual Step 6. Click Finish to complete setup. ECM-SKLU-B1 User’s Manual 79...
-
Page 80: Install Irst Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 2. Click Next. Step 5. Click Next. 80 ECM-SKLU-B1 User’s Manual... - Page 81 User’s Manual Step 6. Click Next. Step 7. Click Finish to complete setup. ECM-SKLU-B1 User’s Manual 81...
-
Page 82: Mechanical Drawing
ECM-SKLU-B1 User’s Manual 5. Mechanical Drawing 82 ECM-SKLU-B1 User’s Manual... - Page 83 User’s Manual Unit: mm ECM-SKLU-B1 User’s Manual 83...
- Page 84 ECM-SKLU-B1 User’s Manual Unit: mm 84 ECM-SKLU-B1 User’s Manual...