Related Manuals for Avalue Technology ECM-SKLU
Summary of Contents for Avalue Technology ECM-SKLU
- Page 1 ECM-SKLU Intel® 6th Generation ULT Processor 3.5”Micro Module User’s Manual Ed –24 October 2019 Part No. E2047393801R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
- Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 ECM-SKLU User’s Manual...
-
Page 5: Table Of Contents
PC Buzzer connector (JBZ1) ..................... 29 2.3.21 AUDIO connector (JAUDIO1) ....................29 Signal Description – Audio connector (JAUDIO1) ..............29 2.3.21.1 AUX-032 User’s Guide .................... 30 2.4.1 Jumper and Connector Layout ....................... 30 2.4.2 Jumper and Connector List ......................30 ECM-SKLU User’s Manual... - Page 6 3.6.2.12 Network Stack Configuration ....................51 3.6.2.13 CSM Configuration ........................ 52 3.6.2.14 NVMe Configuration ......................52 3.6.2.15 USB Configuration ......................... 53 3.6.3 Chipset............................54 3.6.3.1 System Agent (SA) Configuration ..................54 3.6.3.1.1 Graphics Configuration ......................55 6 ECM-SKLU User’s Manual...
- Page 7 Install ME Driver ...................... 73 Install VGA Driver ....................74 Install Audio Driver (For Realtek ALC892) .............. 76 Install Ethernet Driver ....................77 Install Serial IO Driver ..................... 79 Install IRST Driver ....................81 5. Mechanical Drawing ....................83 ECM-SKLU User’s Manual...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x 3.5” ECM-SKLU Micro Module 1 x AUX-032 daughter board ... -
Page 9: Document Amendment History
User’s Manual 1.3 Document Amendment History Revision Date Comment April 2017 Avalue Initial Release October 2019 Avalue Update System Specifications ECM-SKLU User’s Manual... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to set up ECM-SKLU or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
Dual channel 18/24-bit LVDS (via 7511B) Audio Realtek ALC892 HD codec Supports 5.1-CH Audio (Co-lay with AC97 Codec ALC888S-VD2-GR) Audio Amp Line in ,Line-Out, Mic in Ethernet LAN Chip 1 x Intel I211AT GbE controller (Co-lay I210AT) ECM-SKLU User’s Manual 11... - Page 12 0% ~ 90% relative humidity, non-condensing Humidity Size (L x W) 5.7" x 4" (146mm x 101mm) Weight 0.44 lbs (0.2 Kg) Win10/8.1/7/Linux OS Support (listed in accordance with Intel document) Note: Specifications are subject to change without notice. 12 ECM-SKLU User’s Manual...
-
Page 13: Architecture Overview-Block Diagram
User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of ECM-SKLU. ECM-SKLU User’s Manual 13... -
Page 14: Hardware Configuration
ECM-SKLU User’s Manual 2. Hardware Configuration 14 ECM-SKLU User’s Manual... -
Page 15: Product Overview
User’s Manual 2.1 Product Overview ECM-SKLU User’s Manual 15... - Page 16 ECM-SKLU User’s Manual 16 ECM-SKLU User’s Manual...
-
Page 17: Jumper And Connector List
LCD inverter connector Matching Connector: JST PHR-5 CPU fan connector 4 x 1 wafer, pitch 2.54mm CPU_FAN1 System fan connector 4 x 1 wafer, pitch 2.54mm SYS_FAN1 COM1 Serial Port 1 connector D-sub 9 pin, male ECM-SKLU User’s Manual 17... - Page 18 EC Debug connector 3 x 1 header, pitch 2.00mm SATA_PWR1 SATA Power connector 2 x 1 wafer, pitch 2.00mm Serial ATA connector SATA1 HDMI connector HDMI1 DDR4 SODIMM socket SO_DIMM1 MINI_PCIE1 Mini-PCIe_connector USIM1 SIM card slot 18 ECM-SKLU User’s Manual...
-
Page 19: Setting Jumpers & Connectors
User’s Manual 2.3 Setting Jumpers & Connectors 2.3.1 Serial port 1 pin9 signal select (JRI1) Ring* +12V * Default 2.3.2 Clear CMOS (JBAT1) Normal* Clear CMOS * Default ECM-SKLU User’s Manual 19... -
Page 20: Lcd Backlight Brightness Adjustment (Jbkl_Sel1)
ECM-SKLU User’s Manual 2.3.3 LCD backlight brightness adjustment (JBKL_SEL1) PWM Mode* DC Mode * Default 2.3.4 AT/ATX Input power select (JAT1) * Default 20 ECM-SKLU User’s Manual... -
Page 21: Lcd Inverter Connector (Jbkl1)
User’s Manual 2.3.5 LCD inverter connector (JBKL1) Signal +12V BKLEN VBRIGHT 2.3.6 CPU fan connector (CPU_FAN1) Signal PWM_FAN0 EC_TACH0 +12V ECM-SKLU User’s Manual 21... -
Page 22: System Fan Connector (Sys_Fan1)
ECM-SKLU User’s Manual 2.3.7 System fan connector (SYS_FAN1) Signal +12V EC_TACH1 PWM_FAN1 2.3.8 Serial port 2/3/4/5/6 connector (JCOM2/3/4/5/6) JCOM2 JCOM5 JCOM3 JCOM6 JCOM4 Signal PIN PIN Signal COM_DCD# COM_RXD COM_TXD COM_DTR# COM_DSR# COM_RTS# COM_CTS# COM_RI# 22 ECM-SKLU User’s Manual... -
Page 23: Serial Port 2 In Rs-422/485 Mode (J422_485)
2.3.9 Serial port 2 in RS-422/485 mode (J422_485) Signal PIN PIN Signal 485-422_TXDN 485-422_TXDP 422_RXDP 422_RXDN 2.3.10 General purpose I/O connector (JDIO1) Signal PIN PIN Signal DIO_GP20 DIO_GP10 DIO_GP21 DIO_GP11 DIO_GP22 DIO_GP12 DIO_GP23 DIO_GP13 SMB_SCL_S0 SMB_SDA_S0 ECM-SKLU User’s Manual 23... -
Page 24: Sata Power Connector (Sata_Pwr1)
ECM-SKLU User’s Manual 2.3.11 SATA Power connector (SATA_PWR1) Signal 2.3.12 Power connector (PWR1) Signal Signal +26V +26V 24 ECM-SKLU User’s Manual... -
Page 25: Lvds Connector (Jlvds1)
10 LVDS_DATA0_P LVDS_DATA1_N 11 12 LVDS_DATA0_N LVDS_DATA3_P 15 16 LVDS_DATA2_P LVDS_DATA3_N 17 18 LVDS_DATA2_N LVDS_DATA5_P 21 22 LVDS_DATA4_P LVDS_DATA5_N 23 24 LVDS_DATA4_N LVDS_DATA7_P 27 28 LVDS_DATA6_P LVDS_DATA7_N 29 30 LVDS_DATA6_N LVDS_CLK2_P LVDS_CLK1_P LVDS_CLK2_N LVDS_CLK1_N +12V +12V ECM-SKLU User’s Manual 25... -
Page 26: Usb2.0 Connector (Jusb56)
ECM-SKLU User’s Manual 2.3.14 USB2.0 connector (JUSB56) Signal PIN PIN Signal +5VSB USB_R_DN5 USB_R_DP5 USB_R_DP6 USB_R_DN6 +5VSB 2.3.15 SPI connector (JSPI1) Signal PIN PIN Signal +3.3VSB SPI_CS0# SPI_CLK SPI_MISO SPI_MOSI BIOS_HOLD# BIOS_WP# 26 ECM-SKLU User’s Manual... -
Page 27: Ec Debug Connector (Jec_Rom1)
User’s Manual 2.3.16 EC Debug connector (JEC_ROM1) Signal EC_SMDAT_DEBUG EC_SMCLK_DEBUG 2.3.17 Battery connector (BAT1) Signal +RTCBAT ECM-SKLU User’s Manual 27... -
Page 28: Lpc Connector (Jlpc1)
ECM-SKLU User’s Manual 2.3.18 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 RST_TPM# LPC_AD2 LPC_LFRAME# LPC_AD3 CLK2_LPC_DEBUG LPC_SERIRQ 2.3.19 Front Panel connector (JFP1) Signal PIN PIN Signal PWRBTN_TO_EC# PM_SYSRST# FP_PWR_LED+ PWR_LED# HDD_LED# CASE_OPEN# 28 ECM-SKLU User’s Manual... -
Page 29: Pc Buzzer Connector (Jbz1)
HD_AGND HD_AGND LINE1-R-IN LINE1-L-IN MIC1-R-IN MIC1-L-IN FRONT-JD LINE1-JD MIC1-JD HD_AGND 2.3.21.1 Signal Description – Audio connector (JAUDIO1) Signal Signal Description LINE1-JD AUDIO IN (LINE_RIN/LIN)sense pin FRONT-JD AUDIO Out(ROUT/LOUT) sense pin MIC1-JD MIC IN (MIC_RIN/LIN) sense pin ECM-SKLU User’s Manual 29... -
Page 30: Aux-032 User's Guide
2.54mm USB connector 5 x 2 header, pitch 2.54mm 2.0mm USB connector 5 x 2 header, pitch 2.0mm 2.0mm USB connector 5 x 2 header, pitch 2.0mm TV / Audio connector 8 x 2 header, pitch 2.54mm 30 ECM-SKLU User’s Manual... -
Page 31: Setting Jumper And Connector
Mic Bais Line out L Line out R SPK L SPK R Line in L Line in R TVGND TVGND COMP 2.0mm USB Connector (JP4) 2.0mm USB Connector (JP5) Signal PIN PIN Signal Signal PIN PIN Signal ECM-SKLU User’s Manual 31... -
Page 32: Cooler Installation
ECM-SKLU User’s Manual 2.5 Cooler installation 1. Please remove release paper. 2. Please follow the below picture to install the cooler and cooler wire. And push down 4 screw of cooler and finish the installation. 32 ECM-SKLU User’s Manual... -
Page 33: Bios Setup
User’s Manual 3.BIOS Setup ECM-SKLU User’s Manual 33... -
Page 34: Introduction
If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. 34 ECM-SKLU User’s Manual... -
Page 35: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. ECM-SKLU User’s Manual 35... -
Page 36: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 36 ECM-SKLU User’s Manual... -
Page 37: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. ECM-SKLU User’s Manual 37... -
Page 38: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 38 ECM-SKLU User’s Manual... -
Page 39: Trusted Computing
3.6.2.1 Trusted Computing Item Options Description Enables or Disables BIOS support for security device. Disable, Security Device Support O.S. will not show Security Device. TCG EFI protocol Enable[Default] and INT1A interface will not be available. 3.6.2.2 APCI Settings ECM-SKLU User’s Manual 39... -
Page 40: Amt Configuration
Last state Disabled[Default], 30 sec 40 sec 50 sec Watch Dog Select WatchDog. 1 min 2 min 10 min 30 min Disabled Enabled/Disabled USB Standby Power USB Standby Power Setting Enabled[Default], during S3/S4/S5. 3.6.2.3 AMT Configuration 40 ECM-SKLU User’s Manual... -
Page 41: Pch-Fw Configuration
BIOS Extension. Note: iAMT H/W is always enabled. This Intel AMT Enabled[Default], option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device. Disabled[Default] Un-Configure ME OEMFlag Bit 15: Un-Configure ME without password. Enabled, 3.6.2.4 PCH-FW Configuration ECM-SKLU User’s Manual 41... -
Page 42: Firmware Update Configuration
Enable/Disable Me FW Image Re-Flash function. Enabled 3.6.2.5 IT8528 Super IO Configuration You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.5.1~ 3.6.2.5.6 for more information. 42 ECM-SKLU User’s Manual... -
Page 43: Serial Port 1 Configuration
Set Parameters of Serial Port 5 (COME). Serial Port 6 Configuration Set Parameters of Serial Port 6 (COMF). 3.6.2.5.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled ECM-SKLU User’s Manual 43... -
Page 44: Serial Port 2 Configuration
3.6.2.5.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled UART 232[Default] Change the Serial Port as UART 232 422 485 UART 422 RS232/422/485. UART 485 3.6.2.5.3 Serial Port 3 Configuration 44 ECM-SKLU User’s Manual... -
Page 45: Serial Port 4 Configuration
Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.5 Serial Port 5 Configuration ECM-SKLU User’s Manual 45... -
Page 46: Serial Port 6 Configuration
ECM-SKLU User’s Manual Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.6 Serial Port 6 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.6 H/W Monitor 46 ECM-SKLU User’s Manual... -
Page 47: S5 Rtc Wake Settings
Select Fixed Time, system will wake on the Wake system from S5 Fixed Time hr::min::sec specified. Select Dynamic Time, System Dynamic Time will wake on the current time + Increase minute(s). 3.6.2.8 Serial Port Console Redirection ECM-SKLU User’s Manual 47... -
Page 48: Legacy Console Redirection Settings
Select a COM port to display COM1[Default], redirection of Legacy OS Legacy Serial Redirection COM1(Pci Bus0, Dev0, Func0) (Disabled) and Legacy OPROM Messages. 3.6.2.9 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. 48 ECM-SKLU User’s Manual... - Page 49 Intel Virtualization Technology additional hardware capabilities provided by Enabled[Default] Vanderpool Technology. Disabled, Turbo Mode Turbo Mode. Enabled[Default] Disabled, CPU C states Enable or disable CPU C states. Enabled[Default] C0/C1 Package C State limit Package C State limit. AUTO[Default] ECM-SKLU User’s Manual 49...
-
Page 50: Intel Txt Configuration
3.6.2.11 SATA Configuration Item Options Description Enabled[Default] SATA Controller(s) Enable or disable SATA Device. Disabled, Enabled SATA Test Mode Test Mode Enable/Disable (Loop Back). Disabled[Default], Enabled Enable PCH to aggressively enter link power Aggressive LPM Support Disabled[Default] state. 50 ECM-SKLU User’s Manual... -
Page 51: Network Stack Configuration
Enabled[Default] Port 2 Enable or Disable SATA Port. Disabled, Hard Disk Drive[Default] Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. 3.6.2.12 Network Stack Configuration ECM-SKLU User’s Manual 51... -
Page 52: Csm Configuration
ECM-SKLU User’s Manual Item Options Description Enabled Network Stack Enable/Disable UEFI Network Stack. Disabled[Default] 3.6.2.13 CSM Configuration Item Options Description Enabled CSM Support Enable/Disable CSM Support. Disabled[Default] 3.6.2.14 NVMe Configuration 52 ECM-SKLU User’s Manual... -
Page 53: Usb Configuration
Maximum time the device will take before it properly reports itself to the Host Controller. Auto[Default] ‘Auto’ uses default value: for a Root port it is Device power-up delay Manual 100ms, for a Hub port the delay is taken form Hub descriptor. ECM-SKLU User’s Manual 53... -
Page 54: Chipset
ECM-SKLU User’s Manual 3.6.3 Chipset 3.6.3.1 System Agent (SA) Configuration Item Option Description Enabled[Default] VT-d VT-d capability. Disabled 54 ECM-SKLU User’s Manual... -
Page 55: Graphics Configuration
BR Button Brightness Control Method 1.BIOS 2.Brightness Button 3.Variable Resistor 4.OS Driver. OS Driver LVDS Back Light PWM Select LVDS back light PWM duty. 100%[Default] 200[Default] LVDS Back Light PWM Select LVDS back light PWM Frequency Frequency. ECM-SKLU User’s Manual 55... -
Page 56: Memory Configuration
ECM-SKLU User’s Manual 3.6.3.1.2 Memory Configuration Item Option Description Maximum Value of TOLUD. Dynamic Dynamic[Default] assignment would adjust TOLUD automatically Max TOLUD 1GB/1.25GB/1.5GB/1.75GB based on largest MMIO length of installed /2GB/2.25GB/2.5GB/2.75GB graphic controller. 56 ECM-SKLU User’s Manual... -
Page 57: Pch-Io Configuration
User’s Manual 3.6.3.2 PCH-IO Configuration Item Option Description Disabled PCH LAN Controller Enable or disable onboard NIC. Enabled[Default] 3.6.3.2.1 PCI Express Configuration ECM-SKLU User’s Manual 57... - Page 58 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2, Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 58 ECM-SKLU User’s Manual...
- Page 59 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 ECM-SKLU User’s Manual 59...
- Page 60 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 60 ECM-SKLU User’s Manual...
- Page 61 L0s State AUTO – BIOS auto ASPM Support configure DISABLE – Disables ASPM. L0sL1 Auto Disabled L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2[Default], Auto[Default] Gen1 PCIe Speed Select PCI Express port speed. Gen2 Gen3 ECM-SKLU User’s Manual 61...
-
Page 62: Usb Configuration
SSIC Port 1 Enable/Disable support for SSIC. Disabled, Option to disable Compliance Mode. Default FALSE[Default], XHCI Disable Compliance Mode is FALSE to not disable Compliance Mode. TRUE Set TRUE to disable Compliance Mode. 3.6.3.2.3 HD Audio Configuration 62 ECM-SKLU User’s Manual... -
Page 63: Security
Enabled = HDA will be HD Audio Enabled unconditionally enabled Auto = HDA will be enabled if Auto[Default], present, disabled otherwise. 3.6.4 Security Administrator Password Set setup Administrator Password User Password Set User Password ECM-SKLU User’s Manual 63... -
Page 64: Secure Boot Menu
User mode with enrolled Platform Key(PK) 2.CSM Enabled function is disabled. Secure Boot mode selector. ‘Custom’ Mode enables Standard Secure Boot Mode users to change Image Execution policy and manage Custom[Default] Secure Boot Keys. 3.6.4.1.1 Key Management 64 ECM-SKLU User’s Manual... - Page 65 User’s Manual ECM-SKLU User’s Manual 65...
- Page 66 ECM-SKLU User’s Manual 66 ECM-SKLU User’s Manual...
- Page 67 User’s Manual Item Option Description Enabled, Install Factory default Secure Boot Keys Provision Factory Default keys Disabled[Default] when System is in Setup Mode. ECM-SKLU User’s Manual 67...
-
Page 68: Boot
Enables or disables boot with Disabled[Default] initialization of a minimal set of devices Fast Boot Enabled required to launch active boot option. Has no effect for BBS boot options. Boot Option #1 Set the system boot order. 68 ECM-SKLU User’s Manual... -
Page 69: Save And Exit
User’s Manual 3.6.6 Save and exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. ECM-SKLU User’s Manual 69... -
Page 70: Discard Changes And Reset
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. 70 ECM-SKLU User’s Manual... -
Page 71: Drivers Installation
User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. ECM-SKLU User’s Manual 71... -
Page 72: Install Chipset Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Install. Step 4. Installing. Step1. Click Next. Step 5. Setup completed. Step 2. Click Accept. 72 ECM-SKLU User’s Manual... -
Page 73: Install Me Driver
Windows 10 operation system. Step 3. Click Next to continue installation. Step 4. Installing. Step1. Click Next to start installation. Step 2. Click Next. Step 5. Click Finish to complete setup. ECM-SKLU User’s Manual 73... -
Page 74: Install Vga Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Yes to accept license agreement. Step 5. Click Next. 74 ECM-SKLU User’s Manual... - Page 75 User’s Manual Step 6. Click Finish to complete setup. ECM-SKLU User’s Manual 75...
-
Page 76: Install Audio Driver (For Realtek Alc892)
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Finish to complete the setup. Step 1. Click Next to continue setup. Step 2. Installing. 76 ECM-SKLU User’s Manual... -
Page 77: Install Ethernet Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Install. Step 2. Click Next. Step 5. Installing. ECM-SKLU User’s Manual 77... - Page 78 ECM-SKLU User’s Manual Step 6. Click Finish to complete setup. 78 ECM-SKLU User’s Manual...
-
Page 79: Install Serial Io Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 2. Click Next. Step 5. Installing. ECM-SKLU User’s Manual 79... - Page 80 ECM-SKLU User’s Manual Step 6. Click Finish to complete setup. 80 ECM-SKLU User’s Manual...
-
Page 81: Install Irst Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 2. Click Next. Step 5. Click Next. ECM-SKLU User’s Manual 81... - Page 82 ECM-SKLU User’s Manual Step 6. Click Next. Step 7. Click Finish to complete setup. 82 ECM-SKLU User’s Manual...
-
Page 83: Mechanical Drawing
User’s Manual 5. Mechanical Drawing ECM-SKLU User’s Manual 83... - Page 84 ECM-SKLU User’s Manual Unit: mm 84 ECM-SKLU User’s Manual...
- Page 85 User’s Manual Unit: mm ECM-SKLU User’s Manual 85...