Electric Motor - MULTIQUIP EM70SH5 Operation Manual

(120 VAC RECEPTACLE)
CONNECT
TO 120/240 VAC,
60 HZ POWER
SOURCE
For operation and maintenance of the electric motor, refer
to the electric motor instruction booklet provided with the
motor.
Protect the electric motor from dust as much as possible
and keep ventilating openings clean.
CAUTION
DO NOT spray water at any time on the electric motor.
DO NOT operate the electric motor in an explosive
environment.
EM70 SERIES PLASTER/MORTAR MIXERS • OPERATION MANUAL — REV. #2 (10/30/19) — PAGE 23
NEMA L5-20P
TWIST-LOCK
(120 VAC PLUG)
NEMA L5-20R
TWIST-LOCK
NEMA L6-20R
TWIST-LOCK
(240 VAC RECEPTACLE)
Figure 11. Electric Motor
OFF/ON
SWITCH
NEMA L6-20P
TWIST-LOCK
(240 VAC PLUG)
VOLTAGE
SELECTOR
SWITCH
This mixer is equipped with a single-phase, 1.5-horsepower,
120/240 VAC motor (Figure 11) which is factory set at
120 VAC.
CAUTION
ALWAYS make sure that the correct voltage is supplied
to the motor. The input voltage requirements can be
found on the electric motor's nameplate. Applying
incorrect power to the motor can severely damage the
motor and may cause serious bodily injury!

ELECTRIC MOTOR

SELECTOR
SINGLE
PHASE
120/240 VAC
1.5 HP
ELECTRIC
MOTOR
GREASE
FITTING
120
240
VOLTAGE
SWITCH