Advertisement
Available languages
Available languages
OBJ_BUCH-2598-002.book Page 7 Thursday, June 30, 2016 10:17 AM
Operation
Remove the battery before cleaning or performing
maintenance on the vacuum cleaner, making tool ad-
justments, changing accessories or storing the vacuum
cleaner. This safety measure prevents the vacuum cleaner
from being started accidentally.
Starting Operation
Before vacuuming, ensure that the filter assembly is
assembled securely.
Only use an undamaged filter (no cracks, small holes,
etc.). Replace a damaged filter immediately.
Switching On and Off
To save energy, only switch the vacuum cleaner on when us-
ing it.
– To switch on the vacuum cleaner, press the On/Off button
2.
– To switch off the vacuum cleaner, press the On/Off button
2 again.
Maintenance and Service
Maintenance and Cleaning
Remove the battery before cleaning or performing
maintenance on the vacuum cleaner, making tool ad-
justments, changing accessories or storing the vacuum
cleaner. This safety measure prevents the vacuum cleaner
from being started accidentally.
For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.
– Clean the vacuum cleaner housing from time to time using
a moist cloth.
– Clean soiled charger contacts using a dry cloth.
Cleaning the Dust Cup (see figures C1–C3)
To maintain the optimum performance of the vacuum cleaner,
clean the dust cup 8 after each use.
– Hold the vacuum cleaner down slightly so that dust cannot
fall out of the dust chamber when the vacuum cleaner is
opened.
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
– Reach into the recess 13 on the motor housing 7 and pull
the filter unit 15 off the motor housing by the filter seal 14.
– Shake/tap out the dust cup 8 over a suitable waste bin.
– If required, clean the dust cup with a moist cloth.
If required, clean the filter assembly (see "Cleaning the Fil-
ter Assembly", page 7).
– Insert the filter unit 15 with the filter seal 14 back into the
motor housing 7.
Afterwards, hang the dust cup at the bottom into the motor
housing, apply light pressure until the dust cup can be
heard to engage.
Bosch Power Tools
Cleaning the Filter Assembly (see figure D)
The filter unit 15 must not be wet cleaned.
– Hold the vacuum cleaner down slightly so that dust cannot
fall out of the dust chamber when the vacuum cleaner is
opened.
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
– Reach into the recess 13 on the motor housing 7 and pull
the filter unit 15 off the motor housing by the filter seal 14.
– Brush down the flaps of the pleated filter with a soft
broom.
– Assembly is carried out in reverse order.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
– Is the dust cup 8 full?
▷ See "Cleaning the Dust Cup", page 7.
– Is the folded filter clogged with dust?
▷ See "Cleaning the Filter Assembly", page 7.
– Is the capacity of the battery pack too low?
▷ See "Battery Charging", page 6.
Regular emptying of the dust cup 8 and cleaning of the filter
assembly 15 ensures optimal vacuum capacity.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
People's Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 4008268484
Fax: (0571) 87774502
E-Mail: contact.ptcn@cn.bosch.com
www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King's Road
North Point, Hong Kong
Customer Service Hotline: +852 2101 0235
Fax: +852 2590 9762
E-Mail: info@hk.bosch.com
www.bosch-pt.com.hk
English | 7
1 609 92A 39W | (30.6.16)
Advertisement
