True T-23DT-HC Installation Manual page 17

TRUE
T-23DT
DANFOSS ELECTRONIC TEMPERATURE CONTROLS
HOW TO USE THE DANFOSS ELECTRONIC CONTROL
ELECTRONIC TEMPERATURE CONTROLS -
DANFOSS:
DEFROST DOWN
USING A DANFOSS ELECTRONIC CONTROL
WITH DIGITAL DISPLAY:
STEP 1 - Press the POWER button
to power on the temperature control. See Figure 1.
STEP 2 - Press the POWER button
to power off the temperature control. See Figure 2.
STEP 3 - Press the DEFROST button
to defrost. See Figure 3.
STEP 4 - Press the UP button
display the set point /cut-out temperature. Press the UP
or DOWN
temperature. See Figure 4.
NOTE: The set point / cut-out temperature is NOT the
cabinet temperature.
STEP 5 - Press the UP button
ºC will display. Press the UP button
°F to °C. See Figure 5.
UP POWER
for 5 seconds
for 5 seconds
for 3 seconds
for 3 seconds to
button to raise or lower the
for 10 seconds, ºF or
to change from
Turning On Power
1
Turning Off Power
2
Defrost
3
Cut Out Temperature
4
Celsius Temperature
5
. .
www truemfg com
16