Table of Contents
Advertisement
TRUE
T-23DT
DANFOSS ELECTRONIC TEMPERATURE CONTROLS
HOW TO USE THE DANFOSS ELECTRONIC CONTROL
ELECTRONIC TEMPERATURE CONTROLS -
DANFOSS:
USING A DANFOSS ELECTRONIC CONTROL
WITH DIGITAL DISPLAY:
STEP 1 - Press both buttons to power on the
temperature control. See Figure 1.
STEP 2 - Press both buttons and hold for 6 seconds
to power off the temperature control. See Figure 2.
STEP 3 - Press bottom button and hold for 6 seconds to
defrost. See Figure 3.
STEP 4 - Press and release top or bottom button for 2
seconds to display cut out temperature.
Raise or lower the set point, use the top or bottom to go
up or down. Release the button and temperature will go
back. See Figure 4.
NOTE: The set point / cut-out temperature is NOT the
cabinet temperature.
STEP 5 - Press upper button and hold for 5 seconds to
change temperature settings from ºF to ºC.
See Figure 5.
15
Turning On Power
1
Turning Off Power
2
Defrost
3
Cut Out Temperature
4
Celsius Temperature
5
.
.
www
truemfg
com
Hide quick links:
Advertisement
Table of Contents
